ESP01LEDDriver

aslak3·ESP01LEDDriver

ESP01LEDDriver PCB layout, top view — open source board by aslak3

About the ESP01LEDDriver PCB

ESP01LEDDriver is an open source PCB design by aslak3, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 53.3 × 49.5 mm, with 28 components from 21 distinct parts.

Other key parts include the AZ1117-3.3 and FT231XS. By type, the board carries 8 capacitors, 7 resistors, 5 connectors, 3 diodes, 2 ICs and 1 transistor.

From the project

Small board for attaching an ESP01 to an addressable LED strip

A schematic is included here, along with the KiCAD data files, whcih are in KiCAD 6 format.

After coming across the ESP01 I was very impressed. It seemed like an excellent solution to problems where a very small controller board was needed, such as running WLED to control addressable LED strips. However the LED strip attachment board I could find used an odd arrangement of receiving power by attaching a USB-A plug directly to the board. I wanted to use a power lead of some description, going to the controller board which then had the LED strip screwed into it on terminals. As I was ordering…

ESP01LEDDriver, from the project README
From the project README

Main components on the ESP01LEDDriver

ESP01LEDDriver bill of materials (BOM)

28 components, 21 distinct parts.

QtyPartRefs
1
AZ1117-3.3
U1
1
FT231XS
U2
1
2N7002
Q1
1
POWERLJACK
CON1
1
Conn_01x04
J1
1
Conn_02x04_Odd_Even
J2
1
Screw_Terminal_01x03
J3
1
USB_B
J5
1
RESETBUTTON
SW1
1
POWERLED
D1
2
UART_LED
D2, D3
1
Bead
FB1
1
47u
C1
1
0.1u
C2
1
10u
C3
1
10n
C4
2
47p
C5, C6
2
4.7u
C7, C8
2
10k
R1, R2
3
1K
R3, R7, R8
Show 1 more
QtyPartRefs
2
27
R5, R6

ESP01LEDDriver design files

The KiCad project lives in the aslak3/ESP01LEDDriver repository on GitHub; these links point at the commit this page was built from.

ESP01LEDDriver: common questions

How big is the ESP01LEDDriver PCB?

The ESP01LEDDriver measures 53.3 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP01LEDDriver?

28 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP01LEDDriver design files?

From the aslak3/ESP01LEDDriver repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP01LEDDriver design in my own project?

Yes, under the terms of its GPL-2.0 license, which aslak3 chose for the repository.