KAPTON-CONNECTOR
AslanLauzon·KAPTON-CONNECTOR
About the KAPTON-CONNECTOR PCB
KAPTON-CONNECTOR is an open source PCB design by AslanLauzon, published on GitHub. It is a 2-layer board measuring 90 × 76 mm, with 28 components from 24 distinct parts.
Other key parts include the TC4427ACOA and INA181. By type, the board carries 8 resistors, 6 capacitors, 5 connectors, 3 diodes, 2 ICs and 1 transistor.
From the project
This system uses a 24V, 14.6A Kapton trace heater to regulate the pressure inside a nitrous oxide oxidizer tank, particularly in colder environments where vapor pressure drops below optimal levels. The heater is PWM-controlled via a high-current N-channel MOSFET, allowing for pre
This system uses a 24V, 14.6A Kapton trace heater to regulate the pressure inside a nitrous oxide oxidizer tank, particularly in colder environments where vapor pressure drops below optimal levels. The heater is PWM-controlled via a high-current N-channel MOSFET, allowing for precise thermal regulation.
Designed by Brandon Moncriefe, Zhihan Cai and Aslan Lauzon for QRET
Main components on the KAPTON-CONNECTOR
KAPTON-CONNECTOR bill of materials (BOM)
28 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TC4427ACOA | SOIC8-N_MC_MCH | U1 |
| 1 | INA181 | SOT-23-6 | U2 |
| 1 | AO3400A | SOT95P280X125-3N | Q1 |
| 2 | XT60PW-M | AMASS_XT60PW-M | J1, J2 |
| 1 | 1985276 | PHOENIX_1985276 | J3 |
| 1 | 1985218 | TE_1985218 | J4 |
| 1 | 10090926-P154XLF | AMPHENOL_10090926-P154XLF | J5 |
| 1 | 14 Amp Fuse | FUSRR508W60L835T400H810 | F1 |
| 1 | 1-1393210-8 | RELAY_1-1393210-8 | K1 |
| 1 | SIR626ADP | POWERPAK_SO-8_SINGLE_VIS | MOSFET1 |
| 1 | MBRS1100T3G | DIOM5436X247N | D1 |
| 1 | V20DM100C-M3/I | TO-263-2 | D2 |
| 1 | SMCJ30CA hongjiacheng | D_SMC | D3 |
| 2 | C4.7uf | C_0805_2012Metric | C1, C3 |
| 2 | C0.1uf | C_0805_2012Metric | C2, C5 |
| 1 | C4.7nf | C_0805_2012Metric | C4 |
| 1 | C0.1u | C_0805_2012Metric | C6 |
| 2 | 100 | R_0805_2012Metric | R1, R2 |
| 1 | R100k | R_0805_2012Metric | R3 |
| 1 | 4.7k | R_0805_2012Metric | R4 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R0.001 | RESC6432X90N | R5 |
| 1 | R5 | R_0805_2012Metric | R6 |
| 1 | R1k | R_0805_2012Metric | R7 |
| 1 | R27 | R_1206_3216Metric | R8 |
KAPTON-CONNECTOR design files
The KiCad project lives in the AslanLauzon/KAPTON-CONNECTOR repository on GitHub; these links point at the commit this page was built from.
- LayoutKAPTON-HEATERV2.kicad_pcb
- SchematicKAPTON-HEATERV2.kicad_sch
KAPTON-CONNECTOR: common questions
How big is the KAPTON-CONNECTOR PCB?
The KAPTON-CONNECTOR measures 90 × 76 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the KAPTON-CONNECTOR?
28 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the KAPTON-CONNECTOR design files?
From the AslanLauzon/KAPTON-CONNECTOR repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the KAPTON-CONNECTOR design in my own project?
The repository has no license, so all rights stay with AslanLauzon. Use it as a reference, and ask the author before reusing the design.