DentureRS485ForCavityForM5Stack
asukiaaa·DentureRS485ForCavityForM5Stack
About the DentureRS485ForCavityForM5Stack PCB
DentureRS485ForCavityForM5Stack is an open source PCB design by asukiaaa, published on GitHub. It is a 2-layer board measuring 54 × 54 mm, with 12 components from 9 distinct parts.
Other key parts include the SP3485EN. By type, the board carries 5 connectors, 1 IC, 1 capacitor and 1 resistor.
From the project
A kicad project for denture about RS485 for M5StackCavity
A kicad project for denture for CavityForM5Stack.
Main components on the DentureRS485ForCavityForM5Stack
DentureRS485ForCavityForM5Stack bill of materials (BOM)
12 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SP3485EN | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Conn_01x04 | PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | Conn_01x08 | PinHeader_1x08_P1.27mm_Vertical | J2 |
| 1 | free_holes | Pads_1x30_P1.27mm_Vertical | J3 |
| 1 | Conn_01x08 | LAN_RJ45_Neltron_Industrial_7810-8P8C | J4 |
| 1 | Conn_01x02 | PinHeader_1x02_P1.27mm_Vertical | J5 |
| 4 | outer_corner | outer_corner | corner1, corner2, corner3, corner4 |
| 1 | 0.1uf | C_0603_1608Metric | C1 |
| 1 | 220 | R_0603_1608Metric | R1 |
DentureRS485ForCavityForM5Stack design files
The KiCad project lives in the asukiaaa/DentureRS485ForCavityForM5Stack repository on GitHub; these links point at the commit this page was built from.
- LayoutdentureRS485.kicad_pcb
DentureRS485ForCavityForM5Stack: common questions
How big is the DentureRS485ForCavityForM5Stack PCB?
The DentureRS485ForCavityForM5Stack measures 54 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DentureRS485ForCavityForM5Stack?
12 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the DentureRS485ForCavityForM5Stack design files?
From the asukiaaa/DentureRS485ForCavityForM5Stack repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DentureRS485ForCavityForM5Stack design in my own project?
The repository has no license, so all rights stay with asukiaaa. Use it as a reference, and ask the author before reusing the design.