39 open source boards using the SP3485EN
Real designs built with the SP3485EN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
FalCAN
AndersBNielsen
76.5 × 30.9 mm54 parts4LNo license48ESP32
OSSM ALT SERVO V3 4
jollydodo
55 × 50 mm120 parts4LCustom license31STM32
Ferret
fullyautomated
50 × 50 mm116 parts4LNo license20ESP32
Fluepdot
Fluepke
70 × 65 mm111 parts2LAGPL-3.017STM32
Panel board
ReflexCreations
281 × 195 mm305 parts4LMIT12STM32
Io board
ReflexCreations
270 × 34 mm95 parts4LMIT8RP2040/RP2350
Panel
dj505
100 × 100 mm80 parts2LNo license3RP2040/RP2350
Nyu openplc te
kiwih
155 × 108 mm153 parts2LGPL-3.02ESP32
ESP
MurilloHorvath
152.2 × 93.3 mm72 parts2LMIT1ESP32
Esp miniarm
Gray-Stone
58.5 × 50 mm49 parts2LNo license1STM32
Placed
danhmanu
100 × 80 mm310 parts2LNo license0RP2040/RP2350
Anarchytechnobox
edwindertien
132.6 × 100 mm236 parts4LNo license0ESP8266
Control board
MahmoudNasser9
146 × 118.2 mm115 parts2LNo license0STM32
Bottom
StanZalewski
83.3 × 88.1 mm115 parts4LNo license0STM32
Pcb pwm board
Mich-Dich
60 × 43 mm91 parts4LMIT0Dlr carrier
arcnode-io
120 × 105 mm89 parts4LNo license0ESP32
Stepper-Motor-Controller
Ricsi1231
42.3 × 42.3 mm86 parts6LMIT0ESP32
Hydroponics reservoir controller
bookofthefuture
100 × 100 mm76 parts2LNo license0ESP32
Com4bbb
eurovibes
54.6 × 86.4 mm61 parts4LCERN-OHL-S-2.00Industrial hat rpi4
V2gkr
65 × 56 mm52 parts2LNo license0STM32
Magnetic encoder node
pavan1713
50 × 50 mm36 parts4LNo license0ESP32
RS485 Gateway Dev2
aayu0-0
57.8 × 18.1 mm21 parts2LNo license0DentureRS485ForCavityForM5Stack
asukiaaa
54 × 54 mm12 parts2LNo license0Comms
dj505
51.4 × 32.3 mm12 parts2LNo license3STM32
PLC STM32 Modbus
danhmanu
100 × 80 mm310 parts2LNo license0ESP32
Node RS485
maivananh111
83.7 × 53.7 mm116 parts2LNo license0Top
StanZalewski
100 × 66.2 mm57 parts4LNo license0ESP32
Test dev1
aayu0-0
57.8 × 18.1 mm21 parts2LNo license0ESP32
Hydroponics tray controller
bookofthefuture
99.5 × 99.5 mm19 parts2LNo license0Rp2040 dongle ioboard 4ports unisolated
OpenLightingProject
106 × 55 mm51 parts2LApache-2.0128ESP32
Junction
DLaxV-Community-Projects-Hub
85 × 65 mm7 parts2LCERN-OHL-P-2.05ESP32
SensactHsIO4
klaus-liebler
90 × 74.6 mm196 parts2LApache-2.04- schematic only · 81 partsRP2040/RP2350
Node v7 0 0
VTC-WISDOM
81 parts6LCERN-OHL-W-2.02 RP2040/RP2350
LV Controller
MECSEM
100 × 100 mm155 parts4LGPL-3.00STM32
Middle
StanZalewski
87.9 × 37.5 mm25 parts2LNo license0RP2040/RP2350
Controller
dj505
55.9 × 41.3 mm9 parts2LNo license3
How designs wire the SP3485EN
Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the SP3485EN connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 23 of 29 designs, most often 100 nF (then 1 µF).
- The B pin has a series resistor on 20 of 30 designs, most often 120 Ω (then 100 Ω).
- The A pin has a series resistor on 19 of 30 designs, most often 120 Ω (then 100 Ω).
- The A pin has a pull-up to 3.3V on 19 of 30 designs, most often 680 Ω (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 5 | Connected to: GND 97% | — |
| Apin 6 | Connected to: A connector 90% |
|
| Bpin 7 | Connected to: A connector 90% |
|
| VCCpin 8 | Connected to: 3.3V 97% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rp2040 dongle ioboard 2ports rdm unisolated by OpenLightingProject, FalCAN by AndersBNielsen, OSSM ALT SERVO V3 4 by jollydodo and Ferret by fullyautomated.
The SP3485EN in open source designs
The gallery holds 39 open source boards using the SP3485EN from 31 GitHub repositories; a typical one measures about 84.3 × 64.5 mm and carries around 76 components.
62% are two-layer designs, the rest use four layers or more, and 41% carry an open source license.
The most starred is Rp2040 dongle ioboard 4ports unisolated by OpenLightingProject.
Parts used alongside the SP3485EN
Microcontrollers on boards using the SP3485EN
What boards using the SP3485EN are built for
SP3485EN: common questions
Where can I find a SP3485EN reference design?
Each of the 39 boards on this page is a real design using the SP3485EN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SP3485EN VCC pin?
The VCC pin has a decoupling capacitor on 23 of 29 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 30 open source designs using the SP3485EN.
What resistor goes on the SP3485EN B pin?
The B pin has a series resistor on 20 of 30 designs, most often 120 Ω (then 100 Ω). Counted from the KiCad layouts of 30 open source designs using the SP3485EN.
What resistor goes on the SP3485EN A pin?
The A pin has a series resistor on 19 of 30 designs, most often 120 Ω (then 100 Ω). Counted from the KiCad layouts of 30 open source designs using the SP3485EN.
What parts are used alongside the SP3485EN?
The AMS1117-3.3, USBLC6-2SC6, ESP32-S3-WROOM-1, ADS1115IDGS and AP2112K-3.3 appear in the most repositories here.
Which microcontrollers do boards using the SP3485EN use?
Most are built on ESP32 (13), STM32 (11), RP2040/RP2350 (7) and ESP8266 (1).
How big is a typical board using the SP3485EN?
The median is 84.3 × 64.5 mm, and 62% are two-layer designs.
What is the most popular open source board using the SP3485EN?
By GitHub stars, Rp2040 dongle ioboard 4ports unisolated by OpenLightingProject, with 128 stars.
Can I simulate one of these boards using the SP3485EN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.