-wedge100bf comexpress interposer
atahabilder1·-wedge100bf-comexpress-interposer
About the -wedge100bf comexpress interposer PCB
-wedge100bf comexpress interposer is an open source PCB design by atahabilder1, published on GitHub. It is a 6-layer board measuring 132.1 × 146.1 mm, with 32 components from 18 distinct parts.
Other key parts include the TPS563201. By type, the board carries 15 resistors, 8 capacitors, 4 connectors, 1 IC, 1 fuse and 1 jumper.
From the project
A 6-layer COM Express Type 6 interposer for the Edgecore Wedge 100BF-32X switch (Barefoot Tofino ASIC, Portwell PCOM-B634VG-BAREFOOT module with an Intel Pentium D-1517).
A 6-layer COM Express Type 6 interposer for the Edgecore Wedge 100BF-32X switch (Barefoot Tofino ASIC, Portwell PCOM-B634VG-BAREFOOT module with an Intel Pentium D-1517).
The board sits between the CPU module and the switch's carrier board. It:
1. Passes all 440 COM Express pins straight through, so the switch keeps working unchanged. 2. Taps the one free CPU PCIe port, Port 1A (00:01.0, x4), and routes it to a GPU connector.
Main components on the -wedge100bf comexpress interposer
-wedge100bf comexpress interposer bill of materials (BOM)
32 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS563201 | SOT-23-6 | U1 |
| 1 | Bus_PCI_Express_Mini | TE_1775838-2_mPCIe_5.6H | J1 |
| 1 | 3-1827231-6 | CONN440_1827231_TEC | J2 |
| 1 | 3-1827233-6 | CONN440_1827233_TEC | J3 |
| 1 | Bus_PCI_Express_x16 | AMPHENOL_10146070-113Y0LF | J4 |
| 1 | 1.5A hold | Fuse_1206_3216Metric | F1 |
| 1 | J4 3V3 ENABLE | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | SS34 | D_SMA | D1 |
| 1 | 3.3uH XAL5030-332 | L_Coilcraft_XAL5030-XXX | L1 |
| 2 | 10uF 25V | C_1206_3216Metric | C1, C2 |
| 1 | 0.1uF 25V | C_0603_1608Metric | C3 |
| 2 | 0.1uF | C_0603_1608Metric | C4, C8 |
| 3 | 22uF 10V | C_1206_3216Metric | C5, C6, C7 |
| 1 | 36.5k 1% | R_0603_1608Metric | R1 |
| 1 | 10k 1% | R_0603_1608Metric | R2 |
| 1 | 100k | R_0603_1608Metric | R3 |
| 6 | 0R J4 lane0 | R_0402_1005Metric | R10, R11, R12, R13, R14, R15 |
| 6 | 0R J1 lane0 | R_0402_1005Metric | R16, R17, R18, R19, R20, R21 |
-wedge100bf comexpress interposer design files
The KiCad project lives in the atahabilder1/-wedge100bf-comexpress-interposer repository on GitHub; these links point at the commit this page was built from.
-wedge100bf comexpress interposer: common questions
How big is the -wedge100bf comexpress interposer PCB?
The -wedge100bf comexpress interposer measures 132.1 × 146.1 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the -wedge100bf comexpress interposer?
32 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the -wedge100bf comexpress interposer design files?
From the atahabilder1/-wedge100bf-comexpress-interposer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the -wedge100bf comexpress interposer design in my own project?
The repository has no license, so all rights stay with atahabilder1. Use it as a reference, and ask the author before reusing the design.