Projects

atrejojr·Projects·PCB Designs/Terrier Motorsport/TSAL Control/TSAL_Control.kicad_pcb

Projects PCB layout, top view — open source board by atrejojr

About the Projects PCB

Projects is an open source PCB design by atrejojr, published on GitHub. It is a 2-layer board measuring 52.5 × 48.5 mm, with 12 components from 11 distinct parts.

Other key parts include the NE555P. By type, the board carries 3 connectors, 3 resistors, 2 fuses, 2 capacitors, 1 IC and 1 transistor.

From the project

Projects made while at BU

The TSAL Control system, like its name says, controls the Tractive System Active Light (TSAL). Based on the SAE Formula Hybrid + Electric (2025 v1) rule book, there are a few things to consider when designing this control board. It is important to note that this system is not a part of the shutdown loop but serves to warn those around the vehicle that there is high voltage present. This board is only active when high voltage is present outside the AIR coils. In our case, the TS Stepdown will only activate when the HV system is above 100V, so we do not need to integrate voltage comparators or…

Main components on the Projects

Projects bill of materials (BOM)

12 components, 11 distinct parts.

QtyPartRefs
1
NE555P
U1
1
NMOS
Q2
1
39-28-8020
TSV Stepdown
J1
1
TSAL 1
J2
1
TSAL 2
J3
1
500mA Fuse
F1
1
??? Fuse
F2
1
10uF
C1
1
10nF
C2
1
22k
R1
2
10k
R2, R3

Projects design files

The KiCad project lives in the atrejojr/Projects repository on GitHub; these links point at the commit this page was built from.

Projects: common questions

How big is the Projects PCB?

The Projects measures 52.5 × 48.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Projects?

12 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Projects design files?

From the atrejojr/Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Projects design in my own project?

The repository has no license, so all rights stay with atrejojr. Use it as a reference, and ask the author before reusing the design.