RollerBlindsController
AutomatedBrewing·RollerBlindsController·Electronic/Schematic/RollerShutterController/RollerShutterController.kicad_pcb
About the RollerBlindsController PCB
RollerBlindsController is an open source STM32 PCB design by AutomatedBrewing, published on GitHub under the MIT license. It is a 2-layer board measuring 40 × 37 mm, with 45 components from 18 distinct parts.
Its main chip is the STM32C011F4Px, from the STM32 family. Other key parts include the LDK320M33R and LTV-247. By type, the board carries 13 diodes, 10 resistors, 8 capacitors, 4 connectors, 3 ICs and 3 transistors.
From the project
Repository contains code for Roller Blinds Controller.
Before building, install all required dependencies:
For detailed information about dependencies, see DEPENDENCIES.md.
The project uses clang-format and clang-tidy for code quality.
You can: 1. Format whole codebase: ./formatall.sh 2. Run linting: ./lintall.sh 3. Check formatting on commit: git-clang-format --diff --style=file HEAD
Main components on the RollerBlindsController
RollerBlindsController bill of materials (BOM)
45 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LDK320M33R | SOT-23-5_HandSoldering | U1 |
| 1 | STM32C011F4Px | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | LTV-247 | SOP-16_4.4x10.4mm_P1.27mm | U4 |
| 3 | BSS138 | SOT-323_SC-70 | Q1, Q2, Q3 |
| 2 | Conn_01x02_Socket | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J1, J2 |
| 1 | Conn_01x03_Socket | DG301-5.0 | J4 |
| 1 | Conn_01x03_Socket | TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | J6 |
| 1 | Buzzer | LD-BZEL-T56-0505 | BZ1 |
| 1 | SN005-60 | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 2 | AZ921-1A-12DE | AZ921 | K1, K2 |
| 1 | SDB160WS-AQ | D_SOD-323_HandSoldering | D1 |
| 5 | STS321150U751 | D_SOD-323_HandSoldering | D2, D6, D7, D8, D9 |
| 7 | 1N4148WSTR | D_SOD-323_HandSoldering | D3, D4, D5, D12, D13, D14, D15 |
| 3 | 1u 25V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4 |
| 5 | 100n 50V | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5, C6, C7, C8 |
| 3 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R6 |
| 3 | 330R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R5 |
| 4 | 1K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R9, R11, R13 |
RollerBlindsController design files
The KiCad project lives in the AutomatedBrewing/RollerBlindsController repository on GitHub; these links point at the commit this page was built from.
RollerBlindsController: common questions
What microcontroller does the RollerBlindsController use?
The RollerBlindsController is built around the STM32C011F4Px, from the STM32 family.
How big is the RollerBlindsController PCB?
The RollerBlindsController measures 40 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RollerBlindsController?
45 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the RollerBlindsController design files?
From the AutomatedBrewing/RollerBlindsController repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RollerBlindsController design in my own project?
Yes, under the terms of its MIT license, which AutomatedBrewing chose for the repository.
Can I test firmware for the RollerBlindsController without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k