15 open source boards using the LTV-247

Real designs built with the LTV-247, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the LTV-247

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the LTV-247 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a series resistor on 6 of 11 designs, most often 4.7 kΩ (then 2.2 kΩ).
  • Pin 3 has a series resistor on 6 of 11 designs, most often 4.7 kΩ (then 2.2 kΩ).
  • Pin 5 has a series resistor on 6 of 11 designs, most often 4.7 kΩ (then 2.2 kΩ).
  • Pin 7 has a series resistor on 6 of 11 designs, most often 4.7 kΩ (then 2.2 kΩ).
Pin 1Connected to: A connector 27%
  • Series resistor on 55% · 4.7 kΩ (1), 2.2 kΩ (1), 1.5 kΩ (1)
Pin 3Connected to: A connector 27%
  • Series resistor on 55% · 4.7 kΩ (1), 2.2 kΩ (1), 1.5 kΩ (1)
Pin 5Connected to: A connector 27%
  • Series resistor on 55% · 4.7 kΩ (1), 2.2 kΩ (1), 1.5 kΩ (1)
Pin 7Connected to: A connector 27%
  • Series resistor on 55% · 4.7 kΩ (1), 2.2 kΩ (1), 1.5 kΩ (1)
Pin 9Connected to: GND 64% · a signal 36%
Pin 10Connected to: Signal 64% · 3.3V 27%
  • Pull-up to 3.3V on 45% · 10 kΩ (3), 4.7 kΩ (2)
Pin 11Connected to: GND 64% · a signal 36%
Pin 12Connected to: Signal 64% · 3.3V 27%
  • Pull-up to 3.3V on 45% · 10 kΩ (3), 4.7 kΩ (2)
Pin 13Connected to: GND 64% · a signal 36%
Pin 14Connected to: Signal 64% · 3.3V 27%
  • Pull-up to 3.3V on 45% · 10 kΩ (3), 4.7 kΩ (2)
Pin 15Connected to: GND 64% · a signal 36%
Pin 16Connected to: Signal 64% · 3.3V 27%
  • Pull-up to 3.3V on 45% · 10 kΩ (3), 4.7 kΩ (2)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Power board by FOSDEM, Mem esp by fread, RoomIO 001 by jirihusak and PickleRick by icl-rocketry.

The LTV-247 in open source designs

The gallery holds 15 open source boards using the LTV-247 from 11 GitHub repositories; a typical one measures about 90 × 63.9 mm and carries around 120 components.

67% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.

The most starred is Power board by FOSDEM.

Microcontrollers on boards using the LTV-247

LTV-247: common questions

Where can I find a LTV-247 reference design?

Each of the 15 boards on this page is a real design using the LTV-247. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LTV-247 pin 1?

Pin 1 has a series resistor on 6 of 11 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 11 open source designs using the LTV-247.

What resistor goes on the LTV-247 pin 3?

Pin 3 has a series resistor on 6 of 11 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 11 open source designs using the LTV-247.

What resistor goes on the LTV-247 pin 5?

Pin 5 has a series resistor on 6 of 11 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 11 open source designs using the LTV-247.

What parts are used alongside the LTV-247?

The ADS1115IDGS, ESP32-S3, INA219AxDCN, SC4215 and SN65HVD230 appear in the most repositories here.

Which microcontrollers do boards using the LTV-247 use?

Most are built on RP2040/RP2350 (4), ESP32 (3), AVR/Arduino (2) and PIC (2).

How big is a typical board using the LTV-247?

The median is 90 × 63.9 mm, and 67% are two-layer designs.

What is the most popular open source board using the LTV-247?

By GitHub stars, Power board by FOSDEM, with 114 stars.

Can I simulate one of these boards using the LTV-247 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part