01 how2make powersupply boardd like Thestf
About the 01 how2make powersupply boardd like Thestf PCB
01 how2make powersupply boardd like Thestf is an open source PCB design by Awattson, published on GitHub. It is a 2-layer board measuring 132.5 × 82.5 mm, with 68 components from 27 distinct parts.
Other key parts include the LM350T_NOPB, TLP291, CCG30-48-12S and NJM7805SDL1-TE1. By type, the board carries 26 resistors, 11 connectors, 10 transistors, 8 capacitors, 5 diodes and 4 ICs.
Main components on the 01 how2make powersupply boardd like Thestf
01 how2make powersupply boardd like Thestf bill of materials (BOM)
68 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM350T_NOPB | stf_03_LM350T | IC1 |
| 1 | TLP291 | stf_05_TLP291_4.55x2.6mm_P1.27mm | U1 |
| 1 | CCG30-48-12S | stf_09_CCG30-48-12S | U2 |
| 1 | NJM7805SDL1-TE1 | stf_04_NJM7805SDL1-TE1 | U3 |
| 3 | IXTH140P05T | stf_02_IXTH140P05T | Q1, Q3, Q5 |
| 5 | 2SK4017_Q_ | stf_11_TO230P230X650X740-3P | Q2, Q4, Q6, Q8, Q9 |
| 2 | Q_PMOS_GDS | stf_11_TO230P230X650X740-3P | Q7, Q10 |
| 3 | Conn_01x04 | stf_08_tanshidai_4P_cover | J1, J2, J3 |
| 2 | Conn_02x02 | stf_07_molex_microfit4P_vertical_3Dmodel | J4, J9 |
| 4 | EmergencySW | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5, J6, J7, J8 |
| 1 | AllcutSwitch | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J10 |
| 1 | TX90 | stf_06_XT90PW | J11 |
| 3 | Heatsink_Pad_2Pin | stf_01_HeatSink_25x17 | HS1, HS2, HS3 |
| 1 | Varistor | RV_Disc_D9mm_W3.3mm_P5mm | RV1 |
| 2 | D | D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp | D1, D2 |
| 3 | LED | LED_D3.0mm | D3, D4, D5 |
| 5 | 10u | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C5, C6 |
| 3 | 1u | C_Disc_D4.3mm_W1.9mm_P5.00mm | C4, C7, C8 |
| 1 | 560to1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 13 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R4, R5, R9, R10, R16, R17, R18 +5 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R6, R8, R15 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R14 |
| 1 | 120 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R11 |
| 1 | 560 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R12 |
| 1 | 470 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R13 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R19 |
| 2 | 1.5k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R24, R25 |
01 how2make powersupply boardd like Thestf design files
The KiCad project lives in the Awattson/01_how2make_powersupply_boardd_like_Thestf repository on GitHub; these links point at the commit this page was built from.
- LayoutSTF-ps-sample.kicad_pcb
01 how2make powersupply boardd like Thestf: common questions
How big is the 01 how2make powersupply boardd like Thestf PCB?
The 01 how2make powersupply boardd like Thestf measures 132.5 × 82.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 01 how2make powersupply boardd like Thestf?
68 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the 01 how2make powersupply boardd like Thestf design files?
From the Awattson/01_how2make_powersupply_boardd_like_Thestf repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 01 how2make powersupply boardd like Thestf design in my own project?
The repository has no license, so all rights stay with Awattson. Use it as a reference, and ask the author before reusing the design.