FlatDox
About the FlatDox PCB
FlatDox is an open source PCB design by aydenvis, published on GitHub. It is a 2-layer board measuring 119.8 × 99 mm, with 45 components from 9 distinct parts.
Other key parts include the Elite-C. By type, the board carries 21 switches, 19 diodes, 2 inductors, 1 IC and 1 capacitor.
From the project
Rev1 is the Ortho one, Rev2 is the columnar staggered one. Rev3 is the hotswap one. Any questions, PM Quiz#5800
Main components on the FlatDox
FlatDox bill of materials (BOM)
45 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Elite-C | Elite-C | U1 |
| 1 | PJ-320A | TRRS-PJ-320A-dual | PJ1 |
| 18 | Switch | MX_Choc_Symmetric_HotSwap | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +10 |
| 1 | Rotary_Encoder_w_Switch | Rotary_Encoder_with_Switch | SW16 |
| 1 | 2-Pos | 2Pos-Switch | SW20 |
| 1 | ResetSW | ResetSW | SW21 |
| 19 | Diode | Diode | D1, D2, D3, D4, D5, D6, D7, D8 +11 |
| 2 | WS2812B_Single | WS2812B | L1, L2 |
| 1 | 2PIN_JST | 2Pin_JST | C1 |
FlatDox design files
The KiCad project lives in the aydenvis/Ortho-Minidox-Choch-Switches repository on GitHub; these links point at the commit this page was built from.
FlatDox: common questions
How big is the FlatDox PCB?
The FlatDox measures 119.8 × 99 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FlatDox?
45 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the FlatDox design files?
From the aydenvis/Ortho-Minidox-Choch-Switches repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the FlatDox design in my own project?
The repository has no license, so all rights stay with aydenvis. Use it as a reference, and ask the author before reusing the design.
