Flinx
ayukmr·flinx·pcb/flinx.kicad_pcb
About the Flinx PCB
Flinx is an open source PCB design by ayukmr, published on GitHub under the MIT license. It is a 4-layer board measuring 252.5 × 68.8 mm, with 119 components from 18 distinct parts.
Other key parts include the TP4057. By type, the board carries 49 switches, 48 diodes, 6 test points, 6 capacitors, 6 resistors and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
BL654-based low-profile 40% keyboard
The board uses Kailh Choc V2 switches, and purposely doesn't include any stabilizers. The PCB fits directly inside the case and is mounted with four screws. A USB-C port on the side is used for charging, and a switch turns the board on/off. Once turned on, the keyboard pairs over Bluetooth to send keystrokes.
This is intended as a small board mostly for travel, and as a low-profile version of the Monokei Neko.

Main components on the Flinx
Flinx bill of materials (BOM)
119 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4057 | TSOT-23-6 | U1 |
| 1 | 32.768 kHz 9 pF | Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm_HandSoldering | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_JAE_DX07S016JA1R1500 | J1 |
| 1 | 451-00001 | 45100001 | ANT1 |
| 38 | SW_Push | SW_Kailh_Choc_V2_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +30 |
| 4 | SW_Push | SW_Kailh_Choc_V2_1.25u | SW15, SW39, SW42, SW47 |
| 6 | SW_Push | SW_Kailh_Choc_V2_1.75u | SW27, SW28, SW43, SW44, SW45, SW46 |
| 1 | SW_SPDT | SW_EG1215AA | SW49 |
| 6 | TestPoint | Pad_SMD_1.5x1.5 | TP1, TP2, TP3, TP4, TP6, TP7 |
| 48 | D | D_SOD-523 | D1, D2, D3, D4, D5, D6, D7, D8 +40 |
| 1 | 12 pF | C_0603_1608Metric | C1 |
| 1 | 10 pF | C_0603_1608Metric | C2 |
| 1 | 100 nF | C_0603_1608Metric | C3 |
| 3 | 10 uF | C_0603_1608Metric | C4, C5, C6 |
| 2 | 22 | R_0603_1608Metric | R1, R2 |
| 2 | 5.1k | R_0603_1608Metric | R3, R4 |
| 1 | 75k | R_0603_1608Metric | R6 |
| 1 | 10k | R_0603_1608Metric | R7 |
Flinx design files
The KiCad project lives in the ayukmr/flinx repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/flinx.kicad_pcb
- Schematicpcb/flinx.kicad_sch
- BOMpcb/bom.csv
Flinx: common questions
How big is the Flinx PCB?
The Flinx measures 252.5 × 68.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Flinx?
119 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flinx design files?
From the ayukmr/flinx repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Flinx design in my own project?
Yes, under the terms of its MIT license, which ayukmr chose for the repository.