USB3 Ethernet Interface
AyushShuklaaa7·USB3_Ethernet_Interface
About the USB3 Ethernet Interface PCB
USB3 Ethernet Interface is an open source PCB design by AyushShuklaaa7, published on GitHub under the MIT license. It is a 4-layer board measuring 81.9 × 35.3 mm, with 75 components from 30 distinct parts.
Other key parts include the KSZ9031RNXCA, TLV1117LV33DCYT, 93AAxxC and LAN7801-I_9JX. By type, the board carries 34 capacitors, 30 resistors, 4 ICs, 3 inductors, 1 transistor and 1 crystal.
From the project
High-speed USB 3.1 Gen 1 to Gigabit Ethernet interface PCB designed in KiCad using the Microchip LAN7801 and KSZ9031RNX.
This project is a hardware implementation of a USB 3.1 Gen 1 to Gigabit Ethernet adapter designed in KiCad. It is based on the Microchip LAN7801 USB-to-Ethernet controller and the KSZ9031RNX Gigabit Ethernet PHY.
The goal of this project was to gain practical experience in designing a high-speed PCB while following signal integrity, power integrity, and layout guidelines required for USB 3.1 and Gigabit Ethernet interfaces.

Main components on the USB3 Ethernet Interface
USB3 Ethernet Interface bill of materials (BOM)
75 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | KSZ9031RNXCA | QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | U1 |
| 1 | TLV1117LV33DCYT | SOT230P700X180-4N | U2 |
| 1 | 93AAxxC | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | LAN7801-I_9JX | QFN50P900X900X100-65N_LAN7801-I_9JX | U8 |
| 1 | DMG2301L | SOT-23 | Q1 |
| 1 | ABM8G-25.000MHZ-B4Y-T | Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | Polyfuse | Fuse_0805_2012Metric | F2 |
| 1 | ESD8008MUTAG | DIO_ESD8008MUTAG | D1 |
| 1 | 220R | L_0805_2012Metric | FB1 |
| 1 | FerriteBead | L_0805_2012Metric | FB2 |
| 1 | 3.3uH | IND_ME3220-102MLB | L1 |
| 7 | 100nF | C_0402_1005Metric | C1, C2, C3, C4, C5, C18, C30 |
| 1 | 10uF | C_0805_2012Metric | C6 |
| 16 | 0.1uF | C_0402_1005Metric | C7, C8, C13, C16, C17, C19, C21, C24 +8 |
| 1 | 22uF | C_0402_1005Metric | C9 |
| 1 | 4.7uF | C_0402_1005Metric | C10 |
| 4 | 1uF | C_0402_1005Metric | C11, C22, C23, C26 |
| 1 | 10uF | C_0402_1005Metric | C12 |
| 2 | 15pF | C_0402_1005Metric | C14, C15 |
| 1 | 2K | C_0402_1005Metric | C20 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 10K | R_0402_1005Metric | R1, R23, R25, R26, R27, R38, R40 |
| 8 | 4.7K | R_0402_1005Metric | R2, R3, R5, R6, R7, R8, R9, R10 |
| 2 | 12K | R_0402_1005Metric | R4, R28 |
| 1 | 75R | R_0402_1005Metric | R11 |
| 1 | 330k | R_0402_1005Metric | R21 |
| 1 | 100K | R_0402_1005Metric | R22 |
| 1 | 0.1uF | R_0402_1005Metric | R29 |
| 7 | 22R | R_0402_1005Metric | R30, R31, R32, R33, R34, R35, R37 |
| 1 | 1K | R_0402_1005Metric | R36 |
| 1 | 0R | R_0402_1005Metric | R39 |
USB3 Ethernet Interface design files
The KiCad project lives in the AyushShuklaaa7/USB3_Ethernet_Interface repository on GitHub; these links point at the commit this page was built from.
- LayoutUSB3_ethernet.kicad_pcb
- SchematicUSB3_ethernet.kicad_sch
USB3 Ethernet Interface: common questions
How big is the USB3 Ethernet Interface PCB?
The USB3 Ethernet Interface measures 81.9 × 35.3 mm, has 4 copper layers and is 1.59 mm thick.
How many components are on the USB3 Ethernet Interface?
75 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB3 Ethernet Interface design files?
From the AyushShuklaaa7/USB3_Ethernet_Interface repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USB3 Ethernet Interface design in my own project?
Yes, under the terms of its MIT license, which AyushShuklaaa7 chose for the repository.