2526 Maker Drumled

azerty220·2526_Maker_Drumled·pcb/pcb_drumled/pcb_drumled.kicad_pcb

2526 Maker Drumled PCB layout, top view — open source STM32 board by azerty220

About the 2526 Maker Drumled PCB

2526 Maker Drumled is an open source STM32 PCB design by azerty220, published on GitHub. It is a 2-layer board measuring 39.3 × 32 mm, with 19 components from 14 distinct parts.

Its main chip is the STM32G431KBTx, from the STM32 family. By type, the board carries 6 resistors, 4 capacitors, 2 switches, 1 IC and 1 connector.

From the project

Un super projet où l'on met des leds sur une caisse claire de batterie

Le projet consiste à mettre des leds sur la caisse-claire d’une batterie. Ces led s’allumeraient lorsque la caisse-claire reçoit un coup. De plus, il y aurait un encodeur permettant de choisir la couleur de l’éclairage. Le projet a pour but d’être amovible ; c’est-à-dire qu’il puisse être ajouté puis retiré de la caisse claire. Une partie conception 3D est envisagée afin de mettre le projet sur le contour de la caisse claire sans gêner les frappes du batteur, et qu’il n’y ait pas besoin de démonter les peaux pour insérer les leds. Ainsi, nous évitons de faire des trous dans une caisse claire…

2526 Maker Drumled, from the project README
From the project README

Main components on the 2526 Maker Drumled

2526 Maker Drumled bill of materials (BOM)

19 components, 14 distinct parts.

QtyPartRefs
1
STM32G431KBTx
U1
1
Conn_ST_STDC14
J2
2
SW_Push
bouton_couleur1, reset1
1
Conn_01x02_Pin
connecteur_batterie1
1
Conn_01x04_Pin
connecteur_capteur1
1
LD1117S33TR_SOT223
regulateur_vers_3.3V1
1
Conn_01x03_Pin
rgb_neopix1
1
472123020311
switch_on_off1
1
10u
C1
2
100n
C2, C3
1
100u
C4
2
4k7
R1, R2
3
10k
R3, R4, R5
1
300
R7

2526 Maker Drumled design files

The KiCad project lives in the azerty220/2526_Maker_Drumled repository on GitHub; these links point at the commit this page was built from.

2526 Maker Drumled: common questions

What microcontroller does the 2526 Maker Drumled use?

The 2526 Maker Drumled is built around the STM32G431KBTx, from the STM32 family.

How big is the 2526 Maker Drumled PCB?

The 2526 Maker Drumled measures 39.3 × 32 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 2526 Maker Drumled?

19 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the 2526 Maker Drumled design files?

From the azerty220/2526_Maker_Drumled repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 2526 Maker Drumled design in my own project?

The repository has no license, so all rights stay with azerty220. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 2526 Maker Drumled without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards