Cours Univ 2025 v1
B1jam1-74·Projet_Ruche_groupe_1·PCB/PCB1.2/Cours_Univ_2025_v1.kicad_pcb
About the Cours Univ 2025 v1 PCB
Cours Univ 2025 v1 is an open source STM32 PCB design by B1jam1-74, published on GitHub under the MIT license. It is a 2-layer board measuring 59 × 59 mm, with 44 components from 21 distinct parts.
Its main chip is the STM32L031K6Tx, from the STM32 family. Other key parts include the FT231XS, MIC5209-3.3YS and TS2938CS33. By type, the board carries 15 capacitors, 13 resistors, 4 ICs, 4 diodes, 1 crystal and 1 connector.
From the project
5 cartes ont été conçues, fabriquées (JLCPCB) et testées au cours du projet. Cette page liste chaque itération avec son verdict — le détail des erreurs et des correctifs est dans § IV du rapport.
5 cartes ont été conçues, fabriquées (JLCPCB) et testées au cours du projet. Cette page liste chaque itération avec son verdict — le détail des erreurs et des correctifs est dans § IV du rapport.
- LoRa E5benj/ — symbole + footprint pour le socket PLCC-28 du module Seeed LoRa-E5 - Docs/` — notes de conception, brouillons d'empreintes
Le module LoRa est monté sur un socket PLCC-28 plutôt que soudé : remplacement / upgrade sans dessoudage, et fini les ponts entre pins très rapprochées (cf. rapport).
Main components on the Cours Univ 2025 v1
Cours Univ 2025 v1 bill of materials (BOM)
44 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT231XS | SSOP-20_3.9x8.7mm_P0.635mm | U2 |
| 1 | MIC5209-3.3YS | LDO5V | U3 |
| 1 | STM32L031K6Tx | LQFP-32_7x7mm_P0.8mm | U4 |
| 1 | TS2938CS33 | SOP127P600X200-8N | U5 |
| 1 | AMPHENOL-10103593 | AMPHENOL-10103593 | X1 |
| 1 | Conn_01x05 | PinSocket_1x05_P2.54mm_Horizontal | J1 |
| 1 | JS202011CQN | BOOT0 | BOOT0 |
| 4 | Grove_4Pin_SMD | GROVE-HW4-SMD-2.0 | DS18B20, HX711, LORA1, PILE1 |
| 1 | SW_SPST | SW_Push_1P1T_NO_6x6mm_H9.5mm | RESET0 |
| 4 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D3/PA1, D4, D5 |
| 2 | 47pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 3 | 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C10 |
| 1 | 22µF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 6 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C8, C11, C12, C14, C15 |
| 1 | 4.7µF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 5 | 27R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R4, R5, R6 |
| 4 | 330R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R14, R15, R16 |
| 3 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R12 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
Cours Univ 2025 v1 design files
The KiCad project lives in the B1jam1-74/Projet_Ruche_groupe_1 repository on GitHub; these links point at the commit this page was built from.
Cours Univ 2025 v1: common questions
What microcontroller does the Cours Univ 2025 v1 use?
The Cours Univ 2025 v1 is built around the STM32L031K6Tx, from the STM32 family.
How big is the Cours Univ 2025 v1 PCB?
The Cours Univ 2025 v1 measures 59 × 59 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cours Univ 2025 v1?
44 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cours Univ 2025 v1 design files?
From the B1jam1-74/Projet_Ruche_groupe_1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cours Univ 2025 v1 design in my own project?
Yes, under the terms of its MIT license, which B1jam1-74 chose for the repository.
Can I test firmware for the Cours Univ 2025 v1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Projet_Ruche_groupe_1
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k