LAM-RPI-DMX
About the LAM-RPI-DMX PCB
LAM-RPI-DMX is an open source PCB design by b4ck5p4c3, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 55 × 58 mm, with 13 components from 12 distinct parts.
Other key parts include the DS1307Z+, ADM3485EARZ and Mini360. By type, the board carries 3 ICs, 3 connectors, 3 resistors, 1 crystal, 1 battery holder and 1 diode.
From the project
🏭 Series of weird space automation devices
Monorepo for weird building control and automation devices we built in B4CKSP4CE.
- Hardware designs are licensed under the CERN Open Hardware Licence Version 2 - Strongly Reciprocal (CERN-OHL-S-2.0). - Software is licensed under the Mozilla Public License 2.0.
Main components on the LAM-RPI-DMX
LAM-RPI-DMX bill of materials (BOM)
13 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DS1307Z+ | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | ADM3485EARZ | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Mini360 | Module_Mini360 | U3 |
| 1 | 32.768K | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | RPi GPIO Header | PinSocket_2x05_P2.54mm_Vertical | J1 |
| 1 | PWR | PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J2 |
| 1 | Conn_01x03_Socket | PhoenixContact_MC_1,5_3-G-3.81_1x03_P3.81mm_Horizontal | J3 |
| 1 | CR2032 | BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 1 | PESD12VL2BT | SOT-23 | D1 |
| 1 | 0.1uF / 16V | C_0805_2012Metric | C2 |
| 2 | 10R | R_0805_2012Metric | R1, R2 |
| 1 | 0R | R_1206_3216Metric | R3 |
LAM-RPI-DMX design files
The KiCad project lives in the b4ck5p4c3/lambium repository on GitHub; these links point at the commit this page was built from.
LAM-RPI-DMX: common questions
How big is the LAM-RPI-DMX PCB?
The LAM-RPI-DMX measures 55 × 58 mm, has 2 copper layers and is 1.58 mm thick.
How many components are on the LAM-RPI-DMX?
13 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the LAM-RPI-DMX design files?
From the b4ck5p4c3/lambium repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LAM-RPI-DMX design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which b4ck5p4c3 chose for the repository.
