Pd sniffer

Badbird5907·pd-sniffer·PCB/pd-sniffer.kicad_pcb

Pd sniffer PCB layout, top view — open source STM32 board by Badbird5907

About the Pd sniffer PCB

Pd sniffer is an open source STM32 PCB design by Badbird5907, published on GitHub. It is a 2-layer board measuring 63.8 × 44 mm, with 40 components from 24 distinct parts.

Its main chip is the STM32G0B1RET6, from the STM32 family. Other key parts include the INA229AIDGSR, TPS54302DDCR and AP2112K-3.3. By type, the board carries 14 capacitors, 9 resistors, 4 ICs, 4 diodes, 3 connectors and 2 transistors.

Main components on the Pd sniffer

Pd sniffer bill of materials (BOM)

40 components, 24 distinct parts.

QtyPartRefs
1
STM32G0B1RET6
U1
1
INA229AIDGSR
U2
1
TPS54302DDCR
U3
1
AP2112K-3.3
U4
1
AO4407A
Q1
1
MMBT3904
Q2
2
USB C
J1, J2
1
Conn_01x05
J3
1
LUTE 2920L500/24GR
F1
1
ST7789_EYESPI
XUNPU(讯普)
FPC1
1
~
BXCONN(宝讯)
SW1
1
SMAJ20A
D1
2
PRTR5V0U2X
D2, D4
1
BZX84C12
D3
1
CPN4020H100MT
L1
7
100nF
C1, C4, C7, C8, C11, C13, C14
2
47uF
C2, C3
3
10uF
C5, C9, C10
2
1uF
C12, C15
1
5m Shunt
R1
Show 4 more
QtyPartRefs
4
10k
R2, R4, R6, R8
1
100k
R3
1
75k
R5
2
1k
R7, R9

Pd sniffer design files

The KiCad project lives in the Badbird5907/pd-sniffer repository on GitHub; these links point at the commit this page was built from.

Pd sniffer: common questions

What microcontroller does the Pd sniffer use?

The Pd sniffer is built around the STM32G0B1RET6, from the STM32 family.

How big is the Pd sniffer PCB?

The Pd sniffer measures 63.8 × 44 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pd sniffer?

40 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pd sniffer design files?

From the Badbird5907/pd-sniffer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pd sniffer design in my own project?

The repository has no license, so all rights stay with Badbird5907. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pd sniffer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards