Regulador Lineal
About the Regulador Lineal PCB
Regulador Lineal is an open source PCB design by Balta-Etche-FIUBA, published on GitHub. It is a 2-layer board measuring 64 × 51 mm, with 27 components from 17 distinct parts.
Other key parts include the TL431LP. By type, the board carries 9 transistors, 9 resistors, 7 connectors, 1 IC and 1 capacitor.
From the project
Taller de circuitos
"# 1CTDC" Esto es algo que sumo Git ni idea
Main components on the Regulador Lineal
Regulador Lineal bill of materials (BOM)
27 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL431LP | TO-92_Inline | U1 |
| 2 | BD140 | TO-126-3_Vertical | Q1, Q2 |
| 6 | BD139 | TO-126-3_Vertical | Q3, Q4, Q6, Q7, Q8, Q10 |
| 1 | TIP42C | TO-220-3_Vertical | Q5 |
| 1 | I1 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | I2 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | I3 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | gnd | PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | out | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | V1 | PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | in | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J7 |
| 1 | 330n | C_Rect_L7.0mm_W2.0mm_P5.00mm | C4 |
| 1 | 390 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 4 | 470 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R5, R6, R7 |
| 1 | 2 | R_Axial_Power_L38.0mm_W9.0mm_P40.64mm | R4 |
| 2 | 100 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R8, R9 |
Regulador Lineal design files
The KiCad project lives in the Balta-Etche-FIUBA/1CTDC repository on GitHub; these links point at the commit this page was built from.
Regulador Lineal: common questions
How big is the Regulador Lineal PCB?
The Regulador Lineal measures 64 × 51 mm, has 2 copper layers and is 2.565 mm thick.
How many components are on the Regulador Lineal?
27 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Regulador Lineal design files?
From the Balta-Etche-FIUBA/1CTDC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Regulador Lineal design in my own project?
The repository has no license, so all rights stay with Balta-Etche-FIUBA. Use it as a reference, and ask the author before reusing the design.
