Serial boomerang shield
About the Serial boomerang shield
Serial boomerang shield is an open source PCB design by bazsimarkus, published on GitHub. It is a 2-layer board measuring 78 × 55 mm, with 12 components from 12 distinct parts.
By type, the board carries 11 connectors and 1 IC.
It belongs with the keyboards, dev boards & breakouts and retro computing designs in this gallery.
From the project
An ATmega1284P-based single board computer with composite video output, PS/2 keyboard input, running Tiny BASIC.
- Overview - Features - Hardware - Main Board - Schematic - Bill of Materials - Pin Mapping - Firmware - Architecture - Graphics & Video - Tiny BASIC Interpreter - Building & Flashing - Boomerang Shields - Serial Boomerang Shield - Bluetooth Boomerang Shield - Seven Segment Display Extension - SBC Studio - Code Editor & Serial Upload - Bitmap Editor & Loader - MIDI to BAS Converter - BASIC Examples - Hello World - Graphics Demos - Games - Sound Examples - Hardware I/O Examples - Known Limitations & Future Ideas - Personal Notes - Inspirations & Credits
Serial boomerang shield bill of materials (BOM)
12 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | CP2102 Serial Module | U1 |
| 1 | Power connector to board | PinSocket_2x04_P2.54mm_Vertical | J1 |
| 1 | USBasp connector to board | PinSocket_2x05_P2.54mm_Vertical | J2 |
| 1 | Power output | PinSocket_2x02_P2.54mm_Vertical | J3 |
| 1 | Pin Socket B | PinSocket_1x07_P2.54mm_Vertical | J4 |
| 1 | Port B | PinSocket_1x07_P2.54mm_Vertical | J5 |
| 1 | Pin Socket D | PinSocket_1x06_P2.54mm_Vertical | J6 |
| 1 | Port D | PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | Pin Socket A | PinSocket_1x07_P2.54mm_Vertical | J8 |
| 1 | Port A | PinSocket_1x07_P2.54mm_Vertical | J9 |
| 1 | Pin Socket C | PinSocket_1x08_P2.54mm_Vertical | J10 |
| 1 | Port C | PinSocket_1x08_P2.54mm_Vertical | J11 |
Serial boomerang shield design files
The KiCad project lives in the bazsimarkus/avr-basic-sbc repository on GitHub; these links point at the commit this page was built from.
Serial boomerang shield: common questions
How big is the Serial boomerang shield?
The Serial boomerang shield measures 78 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Serial boomerang shield?
12 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Serial boomerang shield design files?
From the bazsimarkus/avr-basic-sbc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Serial boomerang shield design in my own project?
The repository has no license, so all rights stay with bazsimarkus. Use it as a reference, and ask the author before reusing the design.
byrantech
google