Design
beauforr·UAV-charging-demo·TX/Pre-regulator/design.kicad_pcb
About the Design PCB
Design is an open source PCB design by beauforr, published on GitHub. It is a 2-layer board measuring 61 × 35 mm, with 65 components from 31 distinct parts.
Other key parts include the TPL0401A-10DCKR, AP7381-50Y-13, LT8330, AP7381-33Y-13 and ADS1115IDGST. By type, the board carries 23 capacitors, 21 resistors, 10 ICs, 3 inductors, 1 connector and 1 diode.
From the project
Hardware demo based on UAV-Based Charging Solution.

Main components on the Design
Design bill of materials (BOM)
65 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPL0401A-10DCKR | SOT65P210X110-6N | IC1 |
| 1 | AP7381-50Y-13 | FOOT_XC6201P332PR-G | IC2 |
| 1 | LT8330 | TSOT-23_S6 | IC3 |
| 1 | AP7381-33Y-13 | FOOT_XC6201P332PR-G | IC4 |
| 1 | ADS1115IDGST | SOP50P490X110-10N | IC5 |
| 3 | TSC1031 | SOP65P640X120-8N | IC7, IC8, IC10 |
| 2 | — | HOLE | U2, U3 |
| 1 | 62201021121 | 62201021121 | J2 |
| 3 | SOLDERJUMPERTRACE | SJ_2S-TRACE | SJ1, SJ2, SJ3 |
| 1 | — | SOLDERJUMPER_REFLOW | SJ4 |
| 1 | SOLDERJUMPERNO | SJ_2S-NO | SJ7 |
| 1 | — | SJ_3 | SJ8 |
| 1 | SS34 | SOD-123 | D1 |
| 1 | 744877100 | WE-DD_7345 | L1 |
| 1 | 2u2 | WE-LQS_3015 | L4 |
| 1 | 742792692 | WE-CBF_0603(W=2.2) | L7 |
| 1 | 1u | WCAP-CSGP_0805_WAVE | C1 |
| 1 | 10u | 0805 | C2 |
| 5 | 10u | 0603 | C3, C4, C19, C20, C28 |
| 9 | 100n | 0402 | C5, C27, C29, C30, C51, C52, C55, C56 +1 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1u | 0603 | C7 |
| 6 | 10u | 1206 | C8, C9, C10, C11, C12, C13 |
| 2 | 10k | 0603 | R1, R35 |
| 1 | DNP | 0603 | R2 |
| 2 | 4k7 | 0603 | R7, R8 |
| 6 | 100 | 0402 | R9, R10, R11, R12, R30, R31 |
| 3 | 0.01 | 0805 | R16, R29, R32 |
| 3 | 1k | 0402 | R17, R28, R33 |
| 2 | 100k | 0603 | R18, R34 |
| 1 | 47k | 0603 | R19 |
| 1 | DNP | 0805 | R27 |
Design design files
The KiCad project lives in the beauforr/UAV-charging-demo repository on GitHub; these links point at the commit this page was built from.
Design: common questions
How big is the Design PCB?
The Design measures 61 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Design?
65 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Design design files?
From the beauforr/UAV-charging-demo repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Design design in my own project?
The repository has no license, so all rights stay with beauforr. Use it as a reference, and ask the author before reusing the design.