HardLabs

PCB1010 Axoloti 40P to 20P FFC

Believotron·BelievotronWanderlustHardware·Beta1/PCB1010_Axoloti_40P_to_20P_FFC/PCB1010_Axoloti_40P_to_20P_FFC.kicad_pcb

PCB1010 Axoloti 40P to 20P FFC PCB layout, top view — open source STM32 board by Believotron

About the PCB1010 Axoloti 40P to 20P FFC PCB

PCB1010 Axoloti 40P to 20P FFC is an open source STM32 PCB design by Believotron, published on GitHub under the MIT license. It is a 2-layer board measuring 109.2 × 25 mm, with 4 components from 4 distinct parts.

Its main chip is the STM32F103C8T6_BLUE_PILL, from the STM32 family. By type, the board carries 3 connectors and 1 IC.

From the project

For more information: http://believotron.com http://community.believotron.community

Main components on the PCB1010 Axoloti 40P to 20P FFC

STM32F103C8T6_BLUE_PILL

PCB1010 Axoloti 40P to 20P FFC bill of materials (BOM)

4 components, 4 distinct parts.

QtyPartRefs
1
STM32F103C8T6_BLUE_PILL
U5000
1
Axoloti_40Pin
J1
1
FPC_20POS
J2
1
FPC_20POS
J3

PCB1010 Axoloti 40P to 20P FFC design files

The KiCad project lives in the Believotron/BelievotronWanderlustHardware repository on GitHub; these links point at the commit this page was built from.

PCB1010 Axoloti 40P to 20P FFC: common questions

What microcontroller does the PCB1010 Axoloti 40P to 20P FFC use?

The PCB1010 Axoloti 40P to 20P FFC is built around the STM32F103C8T6_BLUE_PILL, from the STM32 family.

How big is the PCB1010 Axoloti 40P to 20P FFC PCB?

The PCB1010 Axoloti 40P to 20P FFC measures 109.2 × 25 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB1010 Axoloti 40P to 20P FFC?

4 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB1010 Axoloti 40P to 20P FFC design files?

From the Believotron/BelievotronWanderlustHardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the PCB1010 Axoloti 40P to 20P FFC design in my own project?

Yes, under the terms of its MIT license, which Believotron chose for the repository.

Can I test firmware for the PCB1010 Axoloti 40P to 20P FFC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in BelievotronWanderlustHardware

Similar boards