PCB1005-KnobCore
Believotron·BelievotronWanderlustHardware·Beta1/PCB1005_KnobCore/PCB1005-KnobCore.kicad_pcb
About the PCB1005-KnobCore PCB
PCB1005-KnobCore is an open source PCB design by Believotron, published on GitHub under the MIT license. It is a 2-layer board measuring 160 × 75.5 mm, with 41 components from 10 distinct parts.
Other key parts include the MCP3008T-I/SL, I2C_1x4MUX_TCA9546A and OLED_128x32_I2C. By type, the board carries 8 resistors, 7 ICs, 3 capacitors and 2 connectors.
From the project
For more information: http://believotron.com http://community.believotron.community
Main components on the PCB1005-KnobCore
PCB1005-KnobCore bill of materials (BOM)
41 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MCP3008T-I/SL | SOIC-16 | U1, U2 |
| 1 | I2C_1x4MUX_TCA9546A | SOIC-16_1.27x5.4 | U3 |
| 4 | OLED_128x32_I2C | OLED_128x32 | U10, U20, U30, U40 |
| 1 | Axoloti_40Pin | Axoloti-40x1_slim | J1 |
| 1 | FPC_20POS | FFC_1MM_20POS_MOLEX_52271-2079 | J2 |
| 6 | CONN_01X01 | single_0.1 | CS_0_7, GND0, SPI_CLK_0, SPI_MISO_0, SPI_MOSI_0, VCC0 |
| 4 | XYJOY_Alps | JOY_ALPS_RKJXV1224005 | JOY0, JOY1, JOY2, JOY3 |
| 11 | 10K | R_0603 | RC0, RC10, RC20, RC30, RC40, RD0, RD10, RD20 +3 |
| 3 | 0.1u | C_0603 | C1, C2, C3 |
| 8 | POT | POT_ALPS_RK09K1130BM4 | R0, R1, R2, R3, R4, R5, R6, R7 |
PCB1005-KnobCore design files
The KiCad project lives in the Believotron/BelievotronWanderlustHardware repository on GitHub; these links point at the commit this page was built from.
PCB1005-KnobCore: common questions
How big is the PCB1005-KnobCore PCB?
The PCB1005-KnobCore measures 160 × 75.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB1005-KnobCore?
41 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB1005-KnobCore design files?
From the Believotron/BelievotronWanderlustHardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PCB1005-KnobCore design in my own project?
Yes, under the terms of its MIT license, which Believotron chose for the repository.
More boards in BelievotronWanderlustHardware
PCB1001 LED32
Believotron
199 × 15.5 mm151 parts2LMIT5LED Strip - Copy
Believotron
160.2 × 7.6 mm100 parts2LMIT5PCB1003 1Octave 16PAD CPT112S
Believotron
199 × 64 mm93 parts2LMIT5PCB1012-Horz Quad Joy
Believotron
160 × 75.5 mm41 parts2LMIT5PCB1000-Knobs16
Believotron
199 × 30.9 mm33 parts2LMIT5JOY-8CH
Believotron
194 × 30.9 mm32 parts2LMIT5PCB1004 Wanderlust Axoloti Translator
Believotron
111.8 × 27.9 mm32 parts2LMIT5PCB1006-Fader8
Believotron
202 × 62 mm31 parts2LMIT5PCB1007-Axoloti Breakout
Believotron
160 × 48 mm20 parts2LMIT5STM32
PCB1010 Axoloti 40P to 20P FFC
Believotron
109.2 × 25 mm4 parts2LMIT5