AIV DC32 Badge
ben-hawks·AIV_DC32_Badge
About the AIV DC32 Badge PCB
AIV DC32 Badge is an open source PCB design by ben-hawks, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 76 components from 43 distinct parts.
Other key parts include the PCF85063ATT, SC0918 and WL9005P3-33. By type, the board carries 21 capacitors, 12 resistors, 8 connectors, 6 switches, 6 diodes and 5 ICs.
It belongs with the wearables designs in this gallery.
Main components on the AIV DC32 Badge
AIV DC32 Badge bill of materials (BOM)
76 components, 43 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCF85063ATT NXP USA | SOP65P490X110-8N | U1 |
| 1 | SC0918 | MODULE_SC0918 | U2 |
| 3 | WL9005P3-33 | SOT-89-3 | U3, U4, U5 |
| 3 | DMG2301L | SOT-23 | Q1, Q2, Q4 |
| 1 | DMN3731U-7 | SOT-23 | Q3 |
| 1 | BSS138PW | SOT-323_SC-70 | Q5 |
| 1 | SC32S-7PF20PPM | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | SAO_1 | Badgelife-SAOv169-BADGE-2x3 | J1 |
| 1 | SAO_2 | Badgelife-SAOv169-BADGE-2x3 | J2 |
| 1 | SAO_3 | Badgelife-SAOv169-BADGE-2x3 | J3 |
| 1 | SAO_4 | Badgelife-SAOv169-BADGE-2x3 | J4 |
| 1 | SM04B-SRSS-TB(LF)(SN) QWiic/STEMMA QT 1 | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J5 |
| 1 | SM04B-SRSS-TB(LF)(SN) QWiic/STEMMA QT 2 | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J6 |
| 1 | C160403 RPi SWD (JST-SH) | JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J8 |
| 1 | TF-101A-P3 Micro_SD_Card | TF101AP3 | J10 |
| 1 | BC2AAAPC | BAT_BC2AAAPC | BT1 |
| 1 | C968734 Cy-SMD-9019-3040 | Buzzer_CUI_CPT-9019S-SMT | BZ1 |
| 1 | ER-CON24HT-1 AFC07-S24ECC-00 | ER-CON24HT-1-REV | FPC1 |
| 1 | SAO1_GPIO0 | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | SAO1_GPIO1 | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SOLDERJUMPER_3_BRIDGED12 SolderJumper_3_Bridged12 | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP3 |
| 1 | MIC_LR_SELECT | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP4 |
| 1 | ICS-43434 | InvenSense_ICS-43434-6_3.5x2.65mm | MK1 |
| 6 | KMR442NGLFS | KMR442NGLFS_CNK | S1_A1, S2_B1, S3_C1, S4_UP1, S5_DWN1, S6_RST1 |
| 2 | MK-12C02-G015 | SW-SMD_G-SWITCH_MK-12C02-G015 | SW_BRD_PWR1, SW_SAO_PWR1 |
| 1 | BLUE | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | LED1 |
| 2 | 200MA/70V 200mA/70V | SOT-23 | D1, D2 |
| 4 | BAT54CLT1G | SOT95P237X111-3N | D3, D4, D5, D6 |
| 1 | C222882 10uH NRS4018T100MDGJ | L_Taiyo-Yuden_NR-40xx_HandSoldering | L1 |
| 1 | 100NF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 7 | 10UF 10uf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C13, C16, C17, C18, C19 |
| 3 | 4.7UF/50V 4.7uf/50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C11 |
| 7 | 1UF/50V 1uF/50V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8, C9, C10, C12, C14 |
| 1 | 47UF 47uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | HHXC250ARA470MF61G 47uF | CP_Elec_6.3x5.9 | C20 |
| 1 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21 |
| 3 | 120K 120k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4, R6 |
| 3 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R7 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 0.47 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 620K 620k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 2 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
AIV DC32 Badge design files
The KiCad project lives in the ben-hawks/AIV_DC32_Badge repository on GitHub; these links point at the commit this page was built from.
- LayoutAIV_DC31_Staff.kicad_pcb
- SchematicAIV_DC31_Staff.kicad_sch
- BOMDC31 Production/bom.csv
AIV DC32 Badge: common questions
How big is the AIV DC32 Badge PCB?
The AIV DC32 Badge measures 100 × 100 mm, has 4 copper layers and is 1.66 mm thick.
How many components are on the AIV DC32 Badge?
76 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AIV DC32 Badge design files?
From the ben-hawks/AIV_DC32_Badge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AIV DC32 Badge design in my own project?
The repository has no license, so all rights stay with ben-hawks. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k