25 open source boards using the SC0918

Real designs built with the SC0918, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

25 boardsClear filters|Most starred

How designs wire the SC0918

Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the SC0918 connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3_EN pin is left unconnected on 12 of 15 designs (GND on 2).
  • The ADC_VREF pin is left unconnected on 11 of 15 designs (a signal on 4).
GNDpin 3, 8, 13, 18, 23, 28, 38Connected to: GND 85%
GP10pin 14Connected to: A connector 27% · not connected 20%
  • Series resistor on 33% · 330 Ω (4), 1 kΩ (1)
AGNDpin 33Connected to: GND 73% · not connected 27%
ADC_VREFpin 35Connected to: Not connected 73% · a signal 27%
3V3_ENpin 37Connected to: Not connected 80%
VBUSpin 40Connected to: VBUS 67% · not connected 33%

28 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OSO-BOOK-B1 by joeycastillo, BitDogLab Main SMD version by BitDogLab, Remote unit v2 by plusvic and AS3397-Conductor by PhysicsDptAngers.

The SC0918 in open source designs

The gallery holds 25 open source boards using the SC0918 from 24 GitHub repositories; a typical one measures about 85 × 98.7 mm and carries around 29 components.

90% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is OSO-BOOK-B1 by joeycastillo.

Microcontrollers on boards using the SC0918

SC0918: common questions

Where can I find a SC0918 reference design?

Each of the 25 boards on this page is a real design using the SC0918. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SC0918 3V3_EN pin connected?

The 3V3_EN pin is left unconnected on 12 of 15 designs (GND on 2). Counted from the KiCad layouts of 16 open source designs using the SC0918.

How is the SC0918 ADC_VREF pin connected?

The ADC_VREF pin is left unconnected on 11 of 15 designs (a signal on 4). Counted from the KiCad layouts of 16 open source designs using the SC0918.

What parts are used alongside the SC0918?

The IP5306, MAX4466EXK+T, BOB-09056, GD25Q16CTIGR and MEM2075-00-140-01-A appear in the most repositories here.

Which microcontrollers do boards using the SC0918 use?

Most are built on RP2040/RP2350 (12), Raspberry Pi (8) and ESP32 (1).

How big is a typical board using the SC0918?

The median is 85 × 98.7 mm, and 90% are two-layer designs.

What is the most popular open source board using the SC0918?

By GitHub stars, OSO-BOOK-B1 by joeycastillo, with 8,091 stars.

Can I simulate one of these boards using the SC0918 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part