HardLabs

INSARIANNE1 haut - v3

BenCestMoiQuoi·C-space-insarianne·KiCad_pour_PCB/PCB_Plaque_Haute/PCB_Plaque_Haute.kicad_pcb

INSARIANNE1 haut - v3 PCB layout, top view — open source AVR/Arduino board by BenCestMoiQuoi

About the INSARIANNE1 haut - v3 PCB

INSARIANNE1 haut - v3 is an open source AVR/Arduino PCB design by BenCestMoiQuoi, published on GitHub. It is a 2-layer board measuring 94 × 94 mm, with 7 components from 5 distinct parts.

Its main chip is the Arduino_Nano, from the AVR/Arduino family.

From the project

Dossier de notre première année C'space Pour le compte de l'association INS'aéro Sur le projet C'space.

Dossier de notre première année C'space Pour le compte de l'association INS'aéro Sur le projet C'space.

Utilisation d'une librairy personalisée https://github.com/BenCestMoiQuoi/INSARIANNE

INSARIANNE1 haut - v3 bill of materials (BOM)

7 components, 5 distinct parts.

QtyPartRefs
1
~
Arduino_Nano1
2
~
Bloc_pile1, Inter_Cap_Vol1
1
~
Inter_Input1
1
~
Octocoupleur1
2
~
Servomoteur1, Servomoteur2

INSARIANNE1 haut - v3 design files

The KiCad project lives in the BenCestMoiQuoi/C-space-insarianne repository on GitHub; these links point at the commit this page was built from.

INSARIANNE1 haut - v3: common questions

What microcontroller does the INSARIANNE1 haut - v3 use?

The INSARIANNE1 haut - v3 is built around the Arduino_Nano, from the AVR/Arduino family.

How big is the INSARIANNE1 haut - v3 PCB?

The INSARIANNE1 haut - v3 measures 94 × 94 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the INSARIANNE1 haut - v3?

7 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the INSARIANNE1 haut - v3 design files?

From the BenCestMoiQuoi/C-space-insarianne repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the INSARIANNE1 haut - v3 design in my own project?

The repository has no license, so all rights stay with BenCestMoiQuoi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the INSARIANNE1 haut - v3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in C-space-insarianne

Similar boards