My Project3
BenguetAime·Shared_Portfolio_Projects·___FaitMaison__2025__Électronique_PCB_KICAD 8_Udemy/my_Project3_ USB POWERED LED CONTROLLER/my_Project3/my_Project3.kicad_pcb
About the My Project3 PCB
My Project3 is an open source STM32 PCB design by BenguetAime, published on GitHub. It is a 2-layer board measuring 35.6 × 16.8 mm, with 14 components from 13 distinct parts.
Its main chip is the STM32L011D4Px, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 5 capacitors, 3 resistors, 2 ICs, 2 connectors, 1 transistor and 1 inductor.
From the project
Mtlab
Main components on the My Project3
My Project3 bill of materials (BOM)
14 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L011D4Px | TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | SI2302 | SOT-23 | Q1 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | USB_B_Micro | USB_Micro-B_Molex_47346-0001 | J2 |
| 1 | 100ohm @ 100m | L_0805_2012Metric | FB1 |
| 2 | 100n | C_0402_1005Metric | C1, C2 |
| 1 | 10n | C_0402_1005Metric | C3 |
| 1 | 10u | C_0603_1608Metric | C4 |
| 1 | 22u | C_0603_1608Metric | C5 |
| 1 | LED1 | R_0805_2012Metric | R1 |
| 1 | LED2 | R_0805_2012Metric | R2 |
| 1 | 22 | R_1206_3216Metric | R3 |
My Project3 design files
The KiCad project lives in the BenguetAime/Shared_Portfolio_Projects repository on GitHub; these links point at the commit this page was built from.
My Project3: common questions
What microcontroller does the My Project3 use?
The My Project3 is built around the STM32L011D4Px, from the STM32 family.
How big is the My Project3 PCB?
The My Project3 measures 35.6 × 16.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the My Project3?
14 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the My Project3 design files?
From the BenguetAime/Shared_Portfolio_Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the My Project3 design in my own project?
The repository has no license, so all rights stay with BenguetAime. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the My Project3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Shared_Portfolio_Projects
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k