My Project2
BenguetAime·Shared_Portfolio_Projects·___FaitMaison__2025__Électronique_PCB_KICAD 8_Udemy/my_Project2_ PIC18F2550/my_Project2/my_Project2.kicad_pcb
About the My Project2 PCB
My Project2 is an open source PIC PCB design by BenguetAime, published on GitHub. It is a 2-layer board measuring 86.1 × 48 mm, with 20 components from 17 distinct parts.
Its main chip is the PIC18F2550-ISP, from the PIC family. Other key parts include the L7805. By type, the board carries 8 connectors, 6 capacitors, 2 ICs, 2 resistors, 1 switch and 1 diode.
From the project
Mtlab
Main components on the My Project2
My Project2 bill of materials (BOM)
20 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC18F2550-ISP | DIP-28_W7.62mm | U1 |
| 1 | L7805 | TO-220-3_Horizontal_TabDown | U2 |
| 1 | Barrel_Jack | BarrelJack_Horizontal | J1 |
| 1 | Power Port | PinSocket_1x09_P2.54mm_Vertical | J2 |
| 1 | GND Hook | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | PORTB | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | PORTC | PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | OSC Port | PinSocket_1x03_P2.54mm_Vertical | J6 |
| 1 | PORTA | PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | ICSP Port | PinSocket_1x05_P2.54mm_Vertical | J8 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | 100u | C_Radial_D5.0mm_H5.0mm_P2.00mm | C1 |
| 1 | 1u | C_Radial_D5.0mm_H5.0mm_P2.00mm | C2 |
| 2 | 100n | C_Disc_D3.0mm_W1.6mm_P2.50mm | C3, C4 |
| 2 | 22p | C_Disc_D3.0mm_W1.6mm_P2.50mm | C5, C6 |
| 2 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
My Project2 design files
The KiCad project lives in the BenguetAime/Shared_Portfolio_Projects repository on GitHub; these links point at the commit this page was built from.
My Project2: common questions
What microcontroller does the My Project2 use?
The My Project2 is built around the PIC18F2550-ISP, from the PIC family.
How big is the My Project2 PCB?
The My Project2 measures 86.1 × 48 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the My Project2?
20 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the My Project2 design files?
From the BenguetAime/Shared_Portfolio_Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the My Project2 design in my own project?
The repository has no license, so all rights stay with BenguetAime. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the My Project2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in Shared_Portfolio_Projects
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379