HardLabs

Server case fan regulator

benoit-lacroix·server-case-fan-regulator·ecad/fan-regulator.kicad_pcb

Server case fan regulator PCB layout, top view — open source AVR/Arduino board by benoit-lacroix

About the Server case fan regulator PCB

Server case fan regulator is an open source AVR/Arduino PCB design by benoit-lacroix, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 44.5 × 30.5 mm, with 7 components from 6 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family.

From the project

A server case fan regulator

This project includes: - Schematics and PCB design (KiCAD) - Software (Arduino Sketch)

Server case fan regulator bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
Arduino_Nano_v3.x
Arduino1
1
Conn_01x04
CV1
1
Conn_01x04_Female
DHT11
1
Conn_02x05_Counter_Clockwise
ETH1
2
Conn_01x04
FAN1, FAN2
1
12V
Power1

Server case fan regulator design files

The KiCad project lives in the benoit-lacroix/server-case-fan-regulator repository on GitHub; these links point at the commit this page was built from.

Server case fan regulator: common questions

What microcontroller does the Server case fan regulator use?

The Server case fan regulator is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Server case fan regulator PCB?

The Server case fan regulator measures 44.5 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Server case fan regulator?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Server case fan regulator design files?

From the benoit-lacroix/server-case-fan-regulator repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Server case fan regulator design in my own project?

Yes, under the terms of its GPL-3.0 license, which benoit-lacroix chose for the repository.

Can I test firmware for the Server case fan regulator without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards