Lamls Type3
About the Lamls Type3 PCB
Lamls Type3 is an open source PCB design by bgerp, published on GitHub. It is a 2-layer board measuring 63.5 × 83.8 mm, with 45 components from 21 distinct parts.
Other key parts include the LM358. By type, the board carries 11 connectors, 11 resistors, 7 diodes, 6 transistors, 1 IC and 1 capacitor.
From the project
This folder is made to hold all the schematics and sheets dedicated to electronic equipment and PCBs part of the project Zontromat.
This folder is made to hold all the schematics and sheets dedicated to electronic equipment and PCBs part of the project Zontromat.
- Contribution is permitted by the owner of the project by request from the contributor.
Main components on the Lamls Type3
Lamls Type3 bill of materials (BOM)
45 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM358 | SO-8_5.3x6.2mm_P1.27mm | U1 |
| 6 | 2N2222 | TO-92_Inline_Wide | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | IN | TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J1 |
| 1 | POWER | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | LAMP2 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J3 |
| 1 | LAMP3 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J4 |
| 1 | LAMP4 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J5 |
| 1 | LAMP1 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J6 |
| 1 | LAMP5 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J7 |
| 1 | LAMP6 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J8 |
| 1 | 4 CH | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | 5 CH | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | ENABLE | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J11 |
| 1 | G2RL-2-ASI-DC12 | Relay_DPDT_Omron_G2RL | RL1 |
| 7 | 20k | Potentiometer_ACP_CA9-V10_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV7 |
| 7 | 1N4007 | D_SMA | D1, D2, D3, D4, D5, D6, D7 |
| 1 | 100nF | C_0805_2012Metric | C1 |
| 2 | 10k | R_0805_2012Metric | R1, R2 |
| 2 | 20k | R_0805_2012Metric | R3, R4 |
| 6 | 680 | R_0805_2012Metric | R5, R6, R7, R8, R9, R10 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1k | R_0805_2012Metric | R11 |
Lamls Type3 design files
The KiCad project lives in the bgerp/ztm_doc repository on GitHub; these links point at the commit this page was built from.
Lamls Type3: common questions
How big is the Lamls Type3 PCB?
The Lamls Type3 measures 63.5 × 83.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lamls Type3?
45 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lamls Type3 design files?
From the bgerp/ztm_doc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lamls Type3 design in my own project?
The repository has no license, so all rights stay with bgerp. Use it as a reference, and ask the author before reusing the design.
More boards in ztm_doc
AVR/ArduinoLamps Type5
123 × 83 mm74 parts2LNo license0
Lamls Type4
63.5 × 83.8 mm41 parts2LNo license0
Convertor
90.2 × 61 mm40 parts2LNo license0
SmartDoor
80.3 × 54.9 mm38 parts2LNo license0
Blinds
81.9 × 81.9 mm24 parts2LNo license0
ControlledBlinds
81.9 × 81.9 mm24 parts2LNo license0
Lamls Type2
88.9 × 53.3 mm23 parts2LNo license0
PLC Plug
109.2 × 53.3 mm23 parts2LNo license0
E-Latch
43.2 × 68.6 mm17 parts2LNo license0
Lamps
43.8 × 56.5 mm14 parts2LNo license0
LDR-0-10V
43.2 × 43.2 mm10 parts2LNo license0