HardLabs

Lamps Type5

bgerp·ztm_doc·PCBs/Lamps/Lamps_Type5/Lamps_Type5/Lamps_Type5.kicad_pcb

Lamps Type5 PCB layout, top view — open source AVR/Arduino board by bgerp

About the Lamps Type5 PCB

Lamps Type5 is an open source AVR/Arduino PCB design by bgerp, published on GitHub. It is a 2-layer board measuring 123 × 83 mm, with 74 components from 11 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the LM358 and LM7805_TO220. By type, the board carries 30 resistors, 24 capacitors, 9 connectors, 6 transistors, 4 ICs and 1 module.

From the project

This folder is made to hold all the schematics and sheets dedicated to electronic equipment and PCBs part of the project Zontromat.

This folder is made to hold all the schematics and sheets dedicated to electronic equipment and PCBs part of the project Zontromat.

- Contribution is permitted by the owner of the project by request from the contributor.

Main components on the Lamps Type5

LM358LM7805_TO220Arduino_Nano_v3.x

Lamps Type5 bill of materials (BOM)

74 components, 11 distinct parts.

QtyPartRefs
3
LM358
U1, U2, U3
1
LM7805_TO220
U7
1
Arduino_Nano_v3.x
A1
6
BC517
Q1, Q2, Q3, Q4, Q5, Q6
7
Conn_01x02_Male
J1, J4, J5, J6, J7, J8, J9
2
Conn_01x04_Female
J2, J3
18
100n
C1, C2, C3, C4, C5, C6, C7, C8 +10
6
1000u/63V
C15, C16, C17, C18, C24, C25
12
100k
R1, R2, R3, R4, R5, R6, R7, R8 +4
12
10k
R9, R10, R11, R12, R13, R14, R15, R16 +4
6
60/2W
R17, R18, R19, R20, R29, R30

Lamps Type5 design files

The KiCad project lives in the bgerp/ztm_doc repository on GitHub; these links point at the commit this page was built from.

Lamps Type5: common questions

What microcontroller does the Lamps Type5 use?

The Lamps Type5 is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Lamps Type5 PCB?

The Lamps Type5 measures 123 × 83 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Lamps Type5?

74 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Lamps Type5 design files?

From the bgerp/ztm_doc repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Lamps Type5 design in my own project?

The repository has no license, so all rights stay with bgerp. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Lamps Type5 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in ztm_doc

Similar boards