B-timer

bitraf·electronics·Reference-designs/stm32f070/B-timer/PCB/B-timer.kicad_pcb

B-timer PCB layout, top view — open source STM32 board by bitraf

About the B-timer PCB

B-timer is an open source STM32 PCB design by bitraf, published on GitHub. It is a 2-layer board measuring 65 × 45 mm, with 121 components from 13 distinct parts.

Its main chip is the STM32F070C6Tx, from the STM32 family. Other key parts include the MIC5504-3.3YM5. By type, the board carries 90 diodes, 12 resistors, 10 capacitors, 3 switches, 2 ICs and 2 connectors.

From the project

Bitraf Electronics Library

You can easily generate a .pos file for use with the pick-and-place machine:

1. In the .kicadpcb file, set the "auxiliary axis origin" (Place > Drill and Place Offset). This point should be at the exact top left corner of the board edge, which by default shows as a thick yellow line on the "Edge.Cuts" layer. 2. Export by going to File > Fabrication Outputs > Footprint Position (.pos) File_.

Main components on the B-timer

STM32F070C6TxMIC5504-3.3YM5

B-timer bill of materials (BOM)

121 components, 13 distinct parts.

QtyPartRefs
1
STM32F070C6Tx
U1
1
MIC5504-3.3YM5
U2
1
USB_B_Micro
J1
1
Conn_02x05_Odd_Even
J2
1
Crystal
8MHz1
1
Buzzer
BZ1
3
SW_Push
SW1, SW2, SW3
90
LED
D1, D2, D3, D4, D5, D6, D7, D8 +82
6
0.1µF
C1, C3, C4, C5, C6, C10
2
1µF
C2, C9
2
18pF
C7, C8
10
68R
R1, R2, R3, R4, R5, R6, R7, R8 +2
2
22R
R11, R12

B-timer design files

The KiCad project lives in the bitraf/electronics repository on GitHub; these links point at the commit this page was built from.

B-timer: common questions

What microcontroller does the B-timer use?

The B-timer is built around the STM32F070C6Tx, from the STM32 family.

How big is the B-timer PCB?

The B-timer measures 65 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the B-timer?

121 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the B-timer design files?

From the bitraf/electronics repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the B-timer design in my own project?

The repository has no license, so all rights stay with bitraf. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the B-timer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in electronics

Similar boards