UV-timer

bitraf·electronics·PCB-etching/UV-exposure/PCB/UV-timer.kicad_pcb

UV-timer PCB layout, top view — open source STM32 board by bitraf

About the UV-timer PCB

UV-timer is an open source STM32 PCB design by bitraf, published on GitHub. It is a 2-layer board measuring 130 × 180 mm, with 20 components from 13 distinct parts.

Its main chip is the STM32F070, from the STM32 family. Other key parts include the TC2EF and OLED. By type, the board carries 7 capacitors, 3 ICs, 3 connectors, 3 switches, 3 resistors and 1 crystal.

From the project

Bitraf Electronics Library

This repository has a list of components available at Bitraf, all components are free to use for members. We strive to have the list of components found here available at all times, so members can use them in new designs.

There is also a list of referece designs made in KiCad, such as step down converter, hello world blinky led based on STM32 uC, a USB hub etc. These are meant to be used as building blocks for ne designs for both members and others.

Main components on the UV-timer

TC2EFSTM32F070OLED

UV-timer bill of materials (BOM)

20 components, 13 distinct parts.

QtyPartRefs
1
TC2EF
U1
1
STM32F070
U2
1
OLED
U3
1
8MHz
Y1
1
USB_OTG
P1
1
CONN_01X03
P2
1
CONN_01X04
P3
3
SW_Push
SW1, SW2, SW3
3
0.1uF
C1, C5, C8
2
18pF
C2, C3
2
4.7uF
C6, C7
2
22R
R1, R2
1
0R
R10

UV-timer design files

The KiCad project lives in the bitraf/electronics repository on GitHub; these links point at the commit this page was built from.

UV-timer: common questions

What microcontroller does the UV-timer use?

The UV-timer is built around the STM32F070, from the STM32 family.

How big is the UV-timer PCB?

The UV-timer measures 130 × 180 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the UV-timer?

20 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the UV-timer design files?

From the bitraf/electronics repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the UV-timer design in my own project?

The repository has no license, so all rights stay with bitraf. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the UV-timer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in electronics

Similar boards