W210 canbus
Blackbird128·W210_canbus·hardware/W210_CAN/W210_CAN.kicad_pcb
About the W210 canbus PCB
W210 canbus is an open source PCB design by Blackbird128, published on GitHub. It is a 2-layer board measuring 37.5 × 33 mm, with 13 components from 10 distinct parts.
Other key parts include the MCP2515-XSO and TJA1055T. By type, the board carries 4 capacitors, 4 resistors, 2 ICs, 2 connectors and 1 crystal.
From the project
Hardware interface to communicate with the CAN-B bus on a Mercedes W210
Dedicated hardware interface for communication with the CAN-B network of a Mercedes-Benz W210 (W202 or W208) The board is based on the MCP2515 CAN controller and the TJA1055 fault-tolerant transceiver, compatible with ISO 11898-3 low-speed CAN networks.

Main components on the W210 canbus
W210 canbus bill of materials (BOM)
13 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2515-XSO MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U1 |
| 1 | TJA1055T | SO-14_3.9x8.65mm_P1.27mm | U2 |
| 1 | Crystal | Crystal_HC49-4H_Vertical | Y1 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 2 | 18PF 18pF | C_0805_2012Metric | C1, C2 |
| 2 | 150PF 150pF | C_0805_2012Metric | C3, C4 |
| 2 | 4.7K 4.7k | R_0805_2012Metric | R1, R2 |
| 1 | 1k | R_0805_2012Metric | R3 |
| 1 | 10K 10k | R_0805_2012Metric | R4 |
W210 canbus design files
The KiCad project lives in the Blackbird128/W210_canbus repository on GitHub; these links point at the commit this page was built from.
W210 canbus: common questions
How big is the W210 canbus PCB?
The W210 canbus measures 37.5 × 33 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the W210 canbus?
13 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the W210 canbus design files?
From the Blackbird128/W210_canbus repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the W210 canbus design in my own project?
The repository has no license, so all rights stay with Blackbird128. Use it as a reference, and ask the author before reusing the design.