Keebee
blakesmith·embedded·keebee/hardware/keebee/keebee.kicad_pcb
About the Keebee PCB
Keebee is an open source STM32 PCB design by blakesmith, published on GitHub. It is a 2-layer board measuring 275 × 103 mm, with 152 components from 21 distinct parts.
Its main chip is the 497-1242-6, from the STM32 family. Other key parts include the 497-7308-1. By type, the board carries 71 diodes, 70 switches, 4 capacitors, 2 ICs, 2 connectors and 2 resistors.
It belongs with the keyboards designs in this gallery.
From the project
Blake's embedded projects
Main components on the Keebee
Keebee bill of materials (BOM)
152 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 497-7308-1 LM1117-3.3 | SOT-223 | U1 |
| 1 | 497-1242-6 STM32F042K6Tx | LQFP-32_7x7mm_Pitch0.8mm | U2 |
| 1 | CP-2524SJ USB_B_Micro | 10118192-0001LF | J1 |
| 1 | ED1543 Conn_ARM_JTAG_SWD_10 | Pin_Header_Straight_2x05_Pitch1.27mm_SMD | J2 |
| 1 | 401-1999-1 SW_SPST | SW_Cherry_MX1A_1.00u_Plate | SW1 |
| 1 | PEC11R-4215K-S0024 SW_SPST | SW_Cherry_MX1A_1.00u_Plate | SW2 |
| 66 | SW_SPST | SW_Cherry_MX1A_1.00u_Plate | SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10 +58 |
| 1 | SW_SPST | SW_Cherry_MX1A_2.00u_Plate | SW35 |
| 1 | SW_RST | SW_PUSH_6mm | SW40 |
| 1 | SW_SPST | SW_PUSH_6mm | SW_BOOT0 |
| 1 | 160-1645-1 LED | LED_0805_HandSoldering | D1 |
| 2 | 160-1423-1 D | D_SOD-123 | D2, D6 |
| 2 | 160-1427-1 D | D_SOD-123 | D3, D5 |
| 1 | 160-1419-1 D | D_SOD-123 | D4 |
| 64 | D | D_SOD-123 | D7, D8, D9, D10, D11, D12, D13, D14 +56 |
| 1 | STATUS_LED | LED_0805_HandSoldering | D41 |
| 2 | 478-1395-1 0.1uf | C_0805_HandSoldering | C1, C2 |
| 1 | 478-1405-1 0.1uf | C_0805_HandSoldering | C3 |
| 1 | 478-1395-1 4.7uf | C_0805_HandSoldering | C4 |
| 1 | 311-10KAR 300 | R_0805_HandSoldering | R1 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 311-24.9CR 300 | R_0805_HandSoldering | R2 |
Keebee design files
The KiCad project lives in the blakesmith/embedded repository on GitHub; these links point at the commit this page was built from.
Keebee: common questions
What microcontroller does the Keebee use?
The Keebee is built around the 497-1242-6, from the STM32 family.
How big is the Keebee PCB?
The Keebee measures 275 × 103 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keebee?
152 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Keebee design files?
From the blakesmith/embedded repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Keebee design in my own project?
The repository has no license, so all rights stay with blakesmith. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Keebee without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in embedded
Nome
blakesmith
91.4 × 91.4 mm59 parts2LNo license167STM32
Stm32f411 breakout
blakesmith
22.9 × 81.3 mm53 parts2LNo license167STM32
Ww
blakesmith
31 × 38 mm45 parts2LNo license167STM32
Stm32l151 raw breakout
blakesmith
20.8 × 61 mm39 parts2LNo license167Cs43l22 breakout
blakesmith
27.9 × 37.3 mm32 parts2LNo license167STM32
Clock
blakesmith
45.7 × 58.4 mm25 parts2LNo license167Microchip SAM
Oxidized flash
blakesmith
61 × 21.6 mm19 parts2LNo license167STM32
Stm32l151 breakout
blakesmith
43.2 × 45.7 mm14 parts2LNo license167As1115 display breakout
blakesmith
44.5 × 21.6 mm7 parts2LNo license167
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k