HardLabs

Stm32l151 breakout

blakesmith·embedded·hardware/breakout_boards/stm32l151_breakout/stm32l151_breakout.kicad_pcb

Stm32l151 breakout layout, top view — open source STM32 board by blakesmith
Simulate this board

About the Stm32l151 breakout

Stm32l151 breakout is an open source STM32 PCB design by blakesmith, published on GitHub. It is a 2-layer board measuring 43.2 × 45.7 mm, with 14 components from 14 distinct parts.

Its main chip is the 497-1242-6, from the STM32 family. Other key parts include the 497-7308-1. By type, the board carries 4 connectors, 2 ICs, 1 diode and 1 resistor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Blake's embedded projects

Main components on the Stm32l151 breakout

497-7308-1497-1242-6

Stm32l151 breakout bill of materials (BOM)

14 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
497-7308-1
LD1117-3.3
U1
1
497-1242-6
STM32L151C
U2
1
CP-2524SJ
USB_B_Micro
J1
1
ED1543
Conn_01x24_Male
J2
1
455-1734-1
Conn_ARM_JTAG_SWD_10
J3
1
952-2265
Conn_01x24_Male
J4
1
C1
0.1uF1
1
C2
0.1uF2
1
C3
0.1uF3
1
C4
0.1uF4
1
C5
0.1uF5
1
C6
10uF1
1
160-1645-1
LED
D1
1
311-10KAR
300
R1

Stm32l151 breakout design files

The KiCad project lives in the blakesmith/embedded repository on GitHub; these links point at the commit this page was built from.

Stm32l151 breakout: common questions

What microcontroller does the Stm32l151 breakout use?

The Stm32l151 breakout is built around the 497-1242-6, from the STM32 family.

How big is the Stm32l151 breakout?

The Stm32l151 breakout measures 43.2 × 45.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stm32l151 breakout?

14 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stm32l151 breakout design files?

From the blakesmith/embedded repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Stm32l151 breakout design in my own project?

The repository has no license, so all rights stay with blakesmith. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stm32l151 breakout without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in embedded

Similar boards