Bloho star badge
Bloho·bloho-star-badge
About the Bloho star badge PCB
Bloho star badge is an open source PCB design by Bloho, published on GitHub. It is a 2-layer board measuring 100 × 99.7 mm, with 24 components from 10 distinct parts.
Other key parts include the LMC555xN. By type, the board carries 13 resistors, 6 diodes, 1 IC, 1 transistor, 1 battery holder and 1 switch.
It belongs with the wearables designs in this gallery.
From the project
A star-shaped, light-sensitive blinking LED PCB badge designed for Hack Club Solder.
A star-shaped, light-sensitive blinking LED PCB badge designed for Hack Club Solder.
The board uses an LMC555 timer in astable mode to blink six LEDs simultaneously. Alongside the oscillator, a photoresistor and 2N3904 transistor form a light-sensing circuit connected to the 555's RESET pin, allowing the LEDs to automatically disable in bright light.
The badge is powered by a CR2032 coin cell and uses through-hole components for easy hand assembly.
Main components on the Bloho star badge
Bloho star badge bill of materials (BOM)
24 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMC555xN | DIP-8_W7.62mm | U1 |
| 1 | 2N3904 | TO-92L_HandSolder | Q1 |
| 1 | Battery_Cell | BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 6 | LED | LED_D5.0mm | D1, D2, D3, D4, D5, D6 |
| 1 | 10uF | CP_Radial_D8.0mm_P5.00mm | C1 |
| 2 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R13 |
| 4 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R10, R11, R12 |
| 6 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R5, R6, R7, R8 |
| 1 | R_Photo | R_LDR_5.1x4.3mm_P3.4mm_Vertical | R9 |
Bloho star badge design files
The KiCad project lives in the Bloho/bloho-star-badge repository on GitHub; these links point at the commit this page was built from.
- Layoutbloho-star-badge.kicad_pcb
- Schematicbloho-star-badge.kicad_sch
Bloho star badge: common questions
How big is the Bloho star badge PCB?
The Bloho star badge measures 100 × 99.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bloho star badge?
24 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bloho star badge design files?
From the Bloho/bloho-star-badge repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bloho star badge design in my own project?
The repository has no license, so all rights stay with Bloho. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k