6 open source boards using the LMC555xN

Real designs built with the LMC555xN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the LMC555xN

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LMC555xN connects to, and the resistors, capacitors and other passives placed on it.

  • The THR pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 10 nF).
  • The TR pin has a series resistor on 4 of 6 designs, most often 10 kΩ (then 47 kΩ).
  • The DIS pin has a series resistor on 4 of 6 designs, most often 10 kΩ (then 4.7 kΩ).
  • The DIS pin has a pull-up to 9V on 4 of 6 designs, most often 10 kΩ (then 68 kΩ).
GNDpin 1Connected to: GND 100%
TRpin 2Connected to: A connector 33%
  • Series resistor on 67% · 10 kΩ (2), 47 kΩ (1)
  • Capacitor to GND on 50% · 10 µF (2)
Qpin 3Connected to: Signal 100%
  • Series resistor on 50% · 220 Ω (6), 470 Ω (1), 100 Ω (1)
Rpin 4Connected to: Signal 67% · not connected 17% · 9V 17%
  • Series resistor on 33% · 10 kΩ (1), 4.7 kΩ (1)
CVpin 5Connected to: Not connected 67% · GND 17% · a signal 17%
THRpin 6Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 µF (2), 10 nF (1), 220 µF (1)
  • Series resistor on 50% · 10 kΩ (1), 47 kΩ (1)
  • Pull-up to 5V on 33% · 10 kΩ (2)
DISpin 7Connected to: Signal 100%
  • Series resistor on 67% · 10 kΩ (2), 4.7 kΩ (1), 47 kΩ (1)
  • Pull-up to 9V on 67% · 10 kΩ (2), 68 kΩ (1)
  • Capacitor to GND on 33% · 10 nF (1), 4.7 µF (1)
VCCpin 8Connected to: 9V 67% · a signal 33%
  • Decoupling capacitor on 33% · 100 nF (2), 10 µF (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Heart PCB by onionharvester, Rc2014 monitor by Hyiger-Designs, SPI Unit by oberrow and BMS by Wierdwizard2587.

The LMC555xN in open source designs

The gallery holds 6 open source boards using the LMC555xN from 6 GitHub repositories; a typical one measures about 100.8 × 60.4 mm and carries around 27 components.

83% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is Heart PCB by onionharvester.

LMC555xN: common questions

Where can I find a LMC555xN reference design?

Each of the 6 boards on this page is a real design using the LMC555xN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LMC555xN THR pin connected?

The THR pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 10 nF). Counted from the KiCad layouts of 6 open source designs using the LMC555xN.

What resistor goes on the LMC555xN TR pin?

The TR pin has a series resistor on 4 of 6 designs, most often 10 kΩ (then 47 kΩ). Counted from the KiCad layouts of 6 open source designs using the LMC555xN.

What resistor goes on the LMC555xN DIS pin?

The DIS pin has a series resistor on 4 of 6 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 6 open source designs using the LMC555xN.

How big is a typical board using the LMC555xN?

The median is 100.8 × 60.4 mm, and 83% are two-layer designs.

What is the most popular open source board using the LMC555xN?

By GitHub stars, Heart PCB by onionharvester, with 50 stars.

Can I simulate one of these boards using the LMC555xN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part