Vimclutch hw
About the Vimclutch hw PCB
Vimclutch hw is an open source PCB design by blu006, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 86 × 30 mm, with 9 components from 5 distinct parts.
Other key parts include the ProMicro. By type, the board carries 3 switches, 2 diodes, 2 resistors, 1 IC and 1 connector.
It belongs with the keyboards and audio designs in this gallery.
From the project
vimclutch hardware
Note that the selected vendors provide a suggestion of the component and the maker may choose to substitute with equivalent components. Cheaper, less reputable vendors often provide parts that are more than acceptable for use in this non-critical project.
The PCB is fabbable using any online PCB fab. The designed thickness is 1.6mm and your mechanical components will fit best at this board thickness. | Component | Value | Quantity | Description | Selected Vendors | | -- | -- | -- | -- | -- | |D\|RED|2|Wide Angle LED. Note that this LED is height constrained. It's possible to sand down a…
Main components on the Vimclutch hw
Vimclutch hw bill of materials (BOM)
9 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | ProMicro | U1 |
| 1 | Conn_01x03_Female | PinHeader_1x03_P2.00mm_Vertical | J1 |
| 3 | SW_Push | SW_PUSH_6mm_H5mm | SW1, SW2, SW3 |
| 2 | LED | LED_D5.0mm | D1, D2 |
| 2 | 2.7k | R_0805_2012Metric | R1, R2 |
Vimclutch hw design files
The KiCad project lives in the blu006/vimclutch_hw repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Foot Pedal PCB.kicad_pcb
- SchematicPCB/Foot Pedal PCB.kicad_sch
Vimclutch hw: common questions
How big is the Vimclutch hw PCB?
The Vimclutch hw measures 86 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vimclutch hw?
9 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vimclutch hw design files?
From the blu006/vimclutch_hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Vimclutch hw design in my own project?
Yes, under the terms of its GPL-3.0 license, which blu006 chose for the repository.
Similar boards
Lily58 Pro
kata0510
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Lite Rev3 TOP Case
142.5 × 106.4 mm34 parts2LMIT2.3k
Lily58 Pro BOTTOM
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Pcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k