05 sulfurmonitoring design v4 no display

bokumentation·STASRG-SulfurMonitoring-Hardware·pcb/design/05_sulfurmonitoring_design_v4_no_display/05_sulfurmonitoring_design_v4_no_display.kicad_pcb

05 sulfurmonitoring design v4 no display PCB layout, top view — open source board by bokumentation

About the 05 sulfurmonitoring design v4 no display PCB

05 sulfurmonitoring design v4 no display is an open source PCB design by bokumentation, published on GitHub. It is a 2-layer board measuring 90 × 150 mm, with 16 components from 15 distinct parts.

Other key parts include the Heltec_WSL_V3, Anemometer, Micro_SDCARD_v2, Wind_Direction and BME280_Module_JST. By type, the board carries 10 ICs and 1 battery holder.

It belongs with the displays & leds designs in this gallery.

Main components on the 05 sulfurmonitoring design v4 no display

Heltec_WSL_V3AnemometerMicro_SDCARD_v2Wind_DirectionBME280_Module_JSTBUCK_MP1584_3V3Light_Sensor_I2C_JSTI2C_EXPANDER_JSTBMS_2S_Module_1_v1

05 sulfurmonitoring design v4 no display bill of materials (BOM)

16 components, 15 distinct parts.

QtyPartRefs
1
Heltec_WSL_V3
U1
1
Anemometer
U2
1
Micro_SDCARD_v2
U3
1
Wind_Direction
U4
1
BME280_Module_JST
U5
1
BUCK_MP1584_3V3
U6
1
Light_Sensor_I2C_JST
U7
2
I2C_EXPANDER_JST
U8, U9
1
BMS_2S_Module_1_v1
U10
1
1048
BT1
1
TB600B SO2
I1
1
TB600C_H2S
I2
1
uBlox_NEO-6M
I3
1
INA219
I5
1
DS3231​
I6

05 sulfurmonitoring design v4 no display design files

The KiCad project lives in the bokumentation/STASRG-SulfurMonitoring-Hardware repository on GitHub; these links point at the commit this page was built from.

05 sulfurmonitoring design v4 no display: common questions

How big is the 05 sulfurmonitoring design v4 no display PCB?

The 05 sulfurmonitoring design v4 no display measures 90 × 150 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 05 sulfurmonitoring design v4 no display?

16 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the 05 sulfurmonitoring design v4 no display design files?

From the bokumentation/STASRG-SulfurMonitoring-Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 05 sulfurmonitoring design v4 no display design in my own project?

The repository has no license, so all rights stay with bokumentation. Use it as a reference, and ask the author before reusing the design.

More boards in STASRG-SulfurMonitoring-Hardware

Similar boards