PortaMid
boomninjavanish·portaMid·schematic/bluetoothMidiController/bluetoothMidiController.kicad_pcb
About the PortaMid PCB
PortaMid is an open source PCB design by boomninjavanish, published on GitHub under the LGPL-3.0 license. It is a 2-layer board measuring 152.9 × 57.2 mm, with 23 components from 22 distinct parts.
Other key parts include the MCP23017_SS. By type, the board carries 17 switches, 3 resistors, 1 IC, 1 diode and 1 capacitor.
It belongs with the iot & wireless and keyboards designs in this gallery.
From the project
The portaMid keyboard is a MIDI keyboard that works over the Bluetooth Low Energy (BLE) protocol which allows one to control music apps on any Apple iOS device. The device contains a 500 mAh lithium polymer rechargeable battery which lasts for many hours of use.
The portaMid keyboard is a MIDI keyboard that works over the Bluetooth Low Energy (BLE) protocol which allows one to control music apps on any Apple iOS device. The device contains a 500 mAh lithium polymer rechargeable battery which lasts for many hours of use.
The one octave of piano style keys are soft to the touch but contain tactile feedback so that the user knows when the key has been pressed. Utilizing the octave keys, the user may lower or raise the octave in which the piano-style keys play. The LED represents the octave selection via different color output.
Main components on the PortaMid
PortaMid bill of materials (BOM)
23 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23017_SS | DIP-28_W7.62mm | U1 |
| 1 | OCT- | SW_PUSH_6mm | SW1 |
| 1 | OCT+ | SW_PUSH_6mm | SW2 |
| 1 | C1 | SW_PUSH-12mm | SW3 |
| 1 | C#1 | SW_PUSH-12mm | SW4 |
| 1 | D1 | SW_PUSH-12mm | SW5 |
| 1 | D#1 | SW_PUSH-12mm | SW6 |
| 1 | E1 | SW_PUSH-12mm | SW7 |
| 1 | F1 | SW_PUSH-12mm | SW8 |
| 1 | F#1 | SW_PUSH-12mm | SW9 |
| 1 | G1 | SW_PUSH-12mm | SW10 |
| 1 | PWR | SW_SMD_DPDT_JS202011SCQN | SW11 |
| 1 | G#1 | SW_PUSH-12mm | SW12 |
| 1 | A1 | SW_PUSH-12mm | SW13 |
| 1 | A#1 | SW_PUSH-12mm | SW14 |
| 1 | B1 | SW_PUSH-12mm | SW15 |
| 1 | C2 | SW_PUSH-12mm | SW16 |
| 1 | OPT | SW_PUSH_6mm | SW17 |
| 1 | NeoPixel_THT | LED_D5.0mm-4_RGB_Wide_Pins | D1 |
| 1 | 0.1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1K | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 2 | 4.7K | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R3 |
PortaMid design files
The KiCad project lives in the boomninjavanish/portaMid repository on GitHub; these links point at the commit this page was built from.
PortaMid: common questions
How big is the PortaMid PCB?
The PortaMid measures 152.9 × 57.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PortaMid?
23 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the PortaMid design files?
From the boomninjavanish/portaMid repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PortaMid design in my own project?
Yes, under the terms of its LGPL-3.0 license, which boomninjavanish chose for the repository.