HardLabs

Pwm5940if uno mini

botanicfields·kicad·bf-012/bf-012.kicad_pcb

Pwm5940if uno mini PCB layout, top view — open source AVR/Arduino board by botanicfields

About the Pwm5940if uno mini PCB

Pwm5940if uno mini is an open source AVR/Arduino PCB design by botanicfields, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 68.6 × 53.3 mm, with 40 components from 29 distinct parts.

Its main chip is the Arduino_1pin, from the AVR/Arduino family. Other key parts include the DS1307+ and MCP9700A. By type, the board carries 17 resistors, 9 connectors, 6 switches, 3 capacitors, 2 ICs and 1 crystal.

From the project

kicad data, libraries, and footprints

BF-005: 16-Segment LED controlled by TLC5940

BF-010: M5Stack interface for TLC5940 and HT16K33

BF-012: Arduino-Uno interface for TLC5940

libraries and footprints used by the projects above, or not used.

Main components on the Pwm5940if uno mini

DS1307+MCP9700A

Pwm5940if uno mini bill of materials (BOM)

40 components, 29 distinct parts.

QtyPartRefs
1
DS1307+
U1
1
MCP9700A
U2
1
32.768kHz
Y1
1
Conn_02x07_Odd_Even
J1
1
Power
P1
1
Analog
P2
1
Digital
P3
1
Digital
P4
4
CONN_01X01
P5, P6, P7, P8
1
CR2032
BT1
1
RESET
SW1
1
SELECT
SW2
1
LEFT
SW3
1
DOWN
SW4
1
UP
SW5
1
RIGHT
SW6
1
LED
D1
1
100u
C1
2
100n
C2, C3
7
22
R1, R2, R3, R4, R5, R6, R7
Show 9 more
QtyPartRefs
1
2.2k
R8
2
4.7k
R9, R10
1
2k
R11
1
510
R12
1
820
R13
1
1.8k
R14
1
5.1k
R15
1
100k
R16
1
GL5528(1M)
R17

Pwm5940if uno mini design files

The KiCad project lives in the botanicfields/kicad repository on GitHub; these links point at the commit this page was built from.

Pwm5940if uno mini: common questions

What microcontroller does the Pwm5940if uno mini use?

The Pwm5940if uno mini is built around the Arduino_1pin, from the AVR/Arduino family.

How big is the Pwm5940if uno mini PCB?

The Pwm5940if uno mini measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pwm5940if uno mini?

40 components, from 29 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pwm5940if uno mini design files?

From the botanicfields/kicad repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Pwm5940if uno mini design in my own project?

Yes, under the terms of its CC0-1.0 license, which botanicfields chose for the repository.

Can I test firmware for the Pwm5940if uno mini without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in kicad

Similar boards