PCB-MBUS-RTC

botanicfields·PCB-MBUS-RTC·PCBV01L01/KiCad/bf-031.kicad_pcb

PCB-MBUS-RTC layout, top view — open source board by botanicfields

About the PCB-MBUS-RTC

PCB-MBUS-RTC is an open source PCB design by botanicfields, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 50 × 50 mm, with 12 components from 10 distinct parts.

Other key parts include the PCF8563T. By type, the board carries 3 capacitors, 2 diodes, 2 resistors, 1 IC, 1 crystal and 1 connector.

From the project

PCF8563 RTC Module for M-Bus of M5Stack Basic and Gray

NXP 社の RTC PCF8563 を搭載した M-BUS モジュールです。RTC を内蔵していない M5Stack Basic, Gray などに使用できます。

委託販売(スイッチサイエンス): https://www.switch-science.com/catalog/7308/

- トリマコンデンサにより、水晶発振子(クリスタル)の周波数を微調整できます。出荷時には可能な範囲で調整済です。

(*1) タイマー設定やアラーム時刻設定により、M5Stack を強制的にリセットすることができます。稼働中の原因不明のハングやメモリーリークなどへの対策として定期的な再起動が必要な場合に利用できるかもしれません。強制リセットからの再起動に失敗する確率はゼロではなく、データ破壊もあり得るなど慎重な検討が必要です。

(*2) ESP32 の問題で GPIO36(および GPIO39)にグリッチが発生します。回避策が以下に書かれています。

PCB-MBUS-RTC, from the project README
From the project README

Main components on the PCB-MBUS-RTC

PCB-MBUS-RTC bill of materials (BOM)

12 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PCF8563T
U2
1
32768HZ
32768Hz
Y1
1
M-BUS
J1
1
CR1220/1225
BT1
1
SW_DIP_X04
SW_DIP_x04
SW1
2
1N4148
D1, D2
1
100N
100n
C1
1
15P
15p
C2
1
30p
C3
2
10K
10k
R1, R2

PCB-MBUS-RTC design files

The KiCad project lives in the botanicfields/PCB-MBUS-RTC repository on GitHub; these links point at the commit this page was built from.

PCB-MBUS-RTC: common questions

How big is the PCB-MBUS-RTC?

The PCB-MBUS-RTC measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB-MBUS-RTC?

12 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PCB-MBUS-RTC design files?

From the botanicfields/PCB-MBUS-RTC repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the PCB-MBUS-RTC design in my own project?

Yes, under the terms of its CC0-1.0 license, which botanicfields chose for the repository.