Jarduino2 ihm
About the Jarduino2 ihm PCB
Jarduino2 ihm is an open source PCB design by bpmine, published on GitHub. It is a 2-layer board measuring 119 × 29 mm, with 18 components from 16 distinct parts.
By type, the board carries 7 diodes, 5 switches, 4 connectors and 2 resistors.
From the project
Ensemble de systèmes pour l'arrosage du jardin
Jarduino2 est une évolution du premier jarduino fabriqué en 2019.
Le premier jarduino était construit avec des platines de prototypage et un arduino MKR Zero Wifi.
Ce nouveau jarduino est construit à partir d'un Nano. On peut le configurer à l'aide d'une interface MODBUS sur l'USB ou bien sur le port série d'extension. Il est possible de lui ajouter une extension Wifi pour le relier au réseau.
Jarduino2 ihm bill of materials (BOM)
18 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Alim CPU | PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 1 | Indicateurs | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Pompes | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Batterie On/Off | PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | Solaire ON/OFF | PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | Pile On/Off | PinHeader_1x02_P2.54mm_Vertical | SW3 |
| 1 | Pompe 1 | PinHeader_1x02_P2.54mm_Vertical | SW4 |
| 1 | Pompe 2 | PinHeader_1x02_P2.54mm_Vertical | SW5 |
| 1 | Solaire OK | LED_D3.0mm_Clear | D1 |
| 1 | Batterie OK | LED_D3.0mm_Clear | D2 |
| 1 | Solaire | LED_D3.0mm_Clear | D3 |
| 1 | Power/Batt | LED_D3.0mm_Clear | D4 |
| 1 | Piles | LED_D3.0mm_Clear | D5 |
| 1 | Pompe 1 | LED_D3.0mm_Clear | D6 |
| 1 | Pompe 2 | LED_D3.0mm_Clear | D7 |
| 2 | 1k | R_Axial_DIN0309_L9.0mm_D3.2mm_P20.32mm_Horizontal | R1, R2 |
Jarduino2 ihm design files
The KiCad project lives in the bpmine/jarduino repository on GitHub; these links point at the commit this page was built from.
Jarduino2 ihm: common questions
How big is the Jarduino2 ihm PCB?
The Jarduino2 ihm measures 119 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jarduino2 ihm?
18 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Jarduino2 ihm design files?
From the bpmine/jarduino repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Jarduino2 ihm design in my own project?
The repository has no license, so all rights stay with bpmine. Use it as a reference, and ask the author before reusing the design.
More boards in jarduino
AVR/ArduinoCommande des OYAs - Maître RS485 - "Maître des OYAs"
132.4 × 70.8 mm66 parts2LNo license0
Microchip SAMEsclave OYA M0
78.6 × 30 mm58 parts2LNo license0
AVR/ArduinoCarte testeur d'Oya
99 × 99 mm58 parts2LNo license0
TI MSP430/CCJarduino2
93 × 89 mm52 parts2LNo license0
TI MSP430/CCEsclave OYA MSP430
78.6 × 30 mm50 parts2LNo license0
AVR/ArduinoEsclave OYA AT328
77.6 × 30 mm49 parts2LNo license0
AVR/ArduinoJarduino2 - Carte Power Nano Autonome
118 × 95 mm38 parts2LNo license0
AVR/ArduinoCarte de commande d'un Oya par RS485
90 × 85 mm37 parts2LNo license0
AVR/ArduinoCarte de commande d'un OYA - Esclave RS485
79.2 × 30 mm37 parts2LNo license0
ESP32Jard c3
78 × 78 mm33 parts2LNo license0
ESP8266Jard wemos
57 × 42 mm30 parts2LNo license0