Atari Video Touch Pad
About the Atari Video Touch Pad PCB
Atari Video Touch Pad is an open source PCB design by BrettHallen, published on GitHub. It is a 2-layer board measuring 38 × 123 mm, with 8 components from 7 distinct parts.
By type, the board carries 5 switches, 2 resistors and 1 connector.
From the project
Projects for the Atari 2600 & 400/800
{Fri 15-Sept-2023} Sent board prototype for fabrication
Atari Video Touch Pad bill of materials (BOM)
8 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DE9 | PinHeader_1x09_P2.54mm_Horizontal | J1 |
| 1 | FORE_VIEW | SW_Cherry_MX_PCB_1.00u | SW1 |
| 1 | GAL_MAP | SW_Cherry_MX_PCB_1.00u | SW2 |
| 1 | HYPERWARP | SW_Cherry_MX_PCB_1.00u | SW3 |
| 1 | COMPUTER_ON/OFF | SW_Cherry_MX_PCB_1.00u | SW4 |
| 1 | SHIELDS_ON/OFF | SW_Cherry_MX_PCB_1.00u | SW5 |
| 2 | 4.7KΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
Atari Video Touch Pad design files
The KiCad project lives in the BrettHallen/Atari repository on GitHub; these links point at the commit this page was built from.
Atari Video Touch Pad: common questions
How big is the Atari Video Touch Pad PCB?
The Atari Video Touch Pad measures 38 × 123 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Atari Video Touch Pad?
8 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Atari Video Touch Pad design files?
From the BrettHallen/Atari repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Atari Video Touch Pad design in my own project?
The repository has no license, so all rights stay with BrettHallen. Use it as a reference, and ask the author before reusing the design.
