Nintendo Famicom Family BASIC 8KB
BrettHallen·Nintendo-Famicom·Family_BASIC_HVC-BS/KiCad/Family_BASIC_8KB_Cartridge/Family_BASIC_8KB_Cartridge.kicad_pcb
About the Nintendo Famicom Family BASIC 8KB PCB
Nintendo Famicom Family BASIC 8KB is an open source PCB design by BrettHallen, published on GitHub. It is a 2-layer board measuring 90 × 90 mm, with 20 components from 14 distinct parts.
Other key parts include the Working RAM (62256), 74HCT20, Character ROM (2764) and Program ROM (27512). By type, the board carries 5 capacitors, 4 ICs, 4 resistors, 3 switches, 2 diodes and 1 battery holder.
From the project
Information regarding the Nintendo Family Computer
I don't know much about this but I know Mr Lurch has done a video with v1.
There is a information available about patching v2.1A to mainly add Famicom Disk System (FDS) support, which also increases the RAM to 8KB. This information mainly concerns itself with creating a Disk BASIC whereas I'm more interested in purely upgrading the cartridge.
This disassembly of the v3.0 ROM is invaluable.

Main components on the Nintendo Famicom Family BASIC 8KB
Nintendo Famicom Family BASIC 8KB bill of materials (BOM)
20 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Working RAM (62256) | DIP-28_W15.24mm | IC1 |
| 1 | 74HCT20 | DIP-14_W7.62mm | IC3 |
| 1 | Character ROM (2764) | DIP-28_W15.24mm | IC4 |
| 1 | Program ROM (27512) | DIP-28_W15.24mm | U1 |
| 1 | 3V | 3000 | BT1 |
| 1 | Famicom Cartridge Edge | Famicom_Cartridge_Edge_Connector_(long_legs) | H1 |
| 1 | BACKUP SW | SW_E-Switch_EG1224_SPDT_Angled | SW1 |
| 1 | RAM BANK SW | SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW2 |
| 1 | A_{15} SW | SW_E-Switch_EG1224_SPDT_Angled | SW3 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | 68PF 68pF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C1 |
| 4 | 100NF 100nF | C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C2, C3, C4, C5 |
| 1 | 5.1KΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 3 | 10KΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4 |
Nintendo Famicom Family BASIC 8KB design files
The KiCad project lives in the BrettHallen/Nintendo-Famicom repository on GitHub; these links point at the commit this page was built from.
- LayoutFamily_BASIC_HVC-BS/KiCad/Family_BASIC_8KB_Cartridge/Family_BASIC_8KB_Cartridge.kicad_pcb
- SchematicFamily_BASIC_HVC-BS/KiCad/Family_BASIC_8KB_Cartridge/Family_BASIC_8KB_Cartridge.kicad_sch
- BOMFamily_BASIC_HVC-BS/KiCad/Family_BASIC_8KB_Cartridge/pcbway_production/2026-01-11-19-43-39/Family_BASIC_8KB_Cartridge.kicad_pcb_bom.csv
Nintendo Famicom Family BASIC 8KB: common questions
How big is the Nintendo Famicom Family BASIC 8KB PCB?
The Nintendo Famicom Family BASIC 8KB measures 90 × 90 mm, has 2 copper layers and is 1.2 mm thick.
How many components are on the Nintendo Famicom Family BASIC 8KB?
20 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Nintendo Famicom Family BASIC 8KB design files?
From the BrettHallen/Nintendo-Famicom repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Nintendo Famicom Family BASIC 8KB design in my own project?
The repository has no license, so all rights stay with BrettHallen. Use it as a reference, and ask the author before reusing the design.