Power Control Card new
About the Power Control Card new PCB
Power Control Card new is an open source PCB design by brianz123, published on GitHub. It is a 2-layer board measuring 100 × 62.5 mm, with 17 components from 14 distinct parts.
By type, the board carries 4 capacitors, 3 connectors, 2 ICs and 1 transistor.
Power Control Card new bill of materials (BOM)
17 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | 240W_CONV | U1 |
| 1 | ~ | 72W_CONV | U2 |
| 1 | FQPF27P06 | TO-220-3_Vertical | Q1 |
| 1 | Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | ~ | 6509475 | J2 |
| 1 | Conn_01x03_Pin | SolderWire-1.5sqmm_1x03_P7.8mm_D1.7mm_OD3.9mm | J3 |
| 1 | TSR2-2450 | TSR2 | DC/DC_CNVRT1 |
| 1 | TSR2-2433 | TSR2 | DC/DC_CNVRT2 |
| 1 | TMCS1101A4B | SOIC-8_3.9x4.9mm_P1.27mm | INPT_CRRNT_SNSR1 |
| 3 | 10kO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | RSW1, RSW2, VDIV2(R)1 |
| 1 | 90kO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | VDIV1(R)1 |
| 1 | 47n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 2 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C6 |
Power Control Card new design files
The KiCad project lives in the brianz123/Backplane-Files repository on GitHub; these links point at the commit this page was built from.
Power Control Card new: common questions
How big is the Power Control Card new PCB?
The Power Control Card new measures 100 × 62.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power Control Card new?
17 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power Control Card new design files?
From the brianz123/Backplane-Files repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Power Control Card new design in my own project?
The repository has no license, so all rights stay with brianz123. Use it as a reference, and ask the author before reusing the design.
