HardLabs

Misc Control Card

brianz123·Backplane-Files·Backplane Files/Cards/Misc_Control_Card/Misc_Control_Card.kicad_pcb

Misc Control Card PCB layout, top view — open source AVR/Arduino board by brianz123

About the Misc Control Card PCB

Misc Control Card is an open source AVR/Arduino PCB design by brianz123, published on GitHub. It is a 2-layer board measuring 100 × 62.5 mm, with 14 components from 10 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the ADS7828, LM1117MP-3.3 and LM1085-5.0. By type, the board carries 4 connectors, 3 ICs, 3 resistors, 2 jumpers, 1 module and 1 capacitor.

Main components on the Misc Control Card

ADS7828LM1117MP-3.3LM1085-5.0Arduino_Nano_v3.x

Misc Control Card bill of materials (BOM)

14 components, 10 distinct parts.

QtyPartRefs
1
ADS7828
U1
1
LM1117MP-3.3
U2
1
LM1085-5.0
U3
1
Arduino_Nano_v3.x
A1
2
Conn_01x02
J1, J4
1
~
J2
1
Conn_01x03
J3
2
SolderJumper_2_Open
JP1, JP2
1
C
C1
3
R
R1, R2, R3

Misc Control Card design files

The KiCad project lives in the brianz123/Backplane-Files repository on GitHub; these links point at the commit this page was built from.

Misc Control Card: common questions

What microcontroller does the Misc Control Card use?

The Misc Control Card is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Misc Control Card PCB?

The Misc Control Card measures 100 × 62.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Misc Control Card?

14 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Misc Control Card design files?

From the brianz123/Backplane-Files repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Misc Control Card design in my own project?

The repository has no license, so all rights stay with brianz123. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Misc Control Card without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Backplane-Files

Similar boards