Multimeter
brodenn·multimeter·kicad/p2.kicad_pcb
About the Multimeter PCB
Multimeter is an open source PCB design by brodenn, published on GitHub. It is a 2-layer board measuring 100.2 × 64.4 mm, with 42 components from 23 distinct parts.
Other key parts include the CD74HCT4511E. By type, the board carries 20 resistors, 6 connectors, 6 diodes, 3 switches, 1 IC and 1 battery holder.
It belongs with the test & measurement designs in this gallery.
From the project
This is my school project where I designed, built, and programmed a fully functional digital multimeter using an Arduino Uno and a custom PCB designed in KiCad.
This is my school project where I designed, built, and programmed a fully functional digital multimeter using an Arduino Uno and a custom PCB designed in KiCad.
📄 Click here to read the full report (PDF)
- 🟢 Voltage Measurement - Low voltage: 0–5V (direct to ADC) - High voltage: 5–33.7V (via voltage divider)
- 🟠 Resistance Measurement - Low resistance: 0–1kΩ - High resistance: 1–100kΩ

Main components on the Multimeter
Multimeter bill of materials (BOM)
42 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CD74HCT4511E | DIP794W53P254L1930H508Q16N | IC1 |
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | Digital/PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Analog | PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J5 |
| 1 | Terminal_01x02 | terminal_battery | J6 |
| 1 | BH9VPC | BAT_BH9VPC | BT2 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 3 | Conn_01x01 | Banana_Jack_1Pin | Banana_GND1, Banana_High1, Banana_Low1 |
| 1 | LDT-N2804RI | DIPS762W45P254L2253H610Q12N | DS1 |
| 1 | CK1050 | SW_CK1050 | S1 |
| 2 | SW_SPDT | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1, SW2 |
| 1 | Red_LED | LED_D5.0mm | D1 |
| 1 | Yellow_Led | LED_D5.0mm | D2 |
| 4 | LED | LED_D5.0mm | D3, D4, D5, D6 |
| 1 | 70k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R6 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 6.8k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 13 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8, R9, R10, R11, R12, R13, R14 +5 |
| 1 | 4606X-101-103LF | 4606X102103LF | RN1 |
Multimeter design files
The KiCad project lives in the brodenn/multimeter repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/p2.kicad_pcb
- Schematickicad/p2.kicad_sch
Multimeter: common questions
How big is the Multimeter PCB?
The Multimeter measures 100.2 × 64.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Multimeter?
42 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Multimeter design files?
From the brodenn/multimeter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Multimeter design in my own project?
The repository has no license, so all rights stay with brodenn. Use it as a reference, and ask the author before reusing the design.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528