2022-SuperCon-Badge-Programing-Addon
About the 2022-SuperCon-Badge-Programing-Addon PCB
2022-SuperCon-Badge-Programing-Addon is an open source PCB design by brokebit, published on GitHub. It is a 6-layer board measuring 37.5 × 48.3 mm, with 25 components from 12 distinct parts.
Other key parts include the CP2102N-AXX-XQFN20. By type, the board carries 7 switches, 5 diodes, 5 resistors, 4 capacitors, 3 connectors and 1 IC.
It belongs with the wearables designs in this gallery.
From the project
2022 SuperCon Badge Programing Addon with USB
The board is a 6-layer design made in KiCad. The surface mount parts should be available directly from JLC PCB, and the through-hole parts are available via Digiki or your other favorite supplier.
The 5V USB supply only powers the USB UART.
Main components on the 2022-SuperCon-Badge-Programing-Addon
2022-SuperCon-Badge-Programing-Addon bill of materials (BOM)
25 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2102N-AXX-XQFN20 CP2102N-Axx-xQFN20 | SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U1 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10118194_Horizontal | J1 |
| 1 | CONN_01X12_MALE Conn_01x12_Male | PinHeader_1x12_P2.54mm_Horizontal | J4 |
| 1 | CONN_01X12_FEMALE Conn_01x12_Female | PinHeader_1x12_P2.54mm_Horizontal | J5 |
| 1 | SW_DIP_X02 SW_DIP_x02 | SW_DIP_SPSTx02_Slide_6.7x6.64mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 4 | SW_Push | SW_PUSH_6mm | SW2, SW3, SW4, SW6 |
| 2 | SW_DIP_X04 SW_DIP_x04 | SW_DIP_SPSTx04_Slide_6.7x11.72mm_W7.62mm_P2.54mm_LowProfile | SW5, SW7 |
| 1 | SP0503BAHT | SOT-143 | D1 |
| 4 | LED | LED_0805_2012Metric | D2, D3, D4, D5 |
| 2 | C | C_0603_1608Metric | C1, C4 |
| 2 | 4.7UF C | C_0603_1608Metric | C2, C3 |
| 5 | R_US | R_0603_1608Metric | R1, R2, R3, R4, R5 |
2022-SuperCon-Badge-Programing-Addon design files
The KiCad project lives in the brokebit/2022-SuperCon-Badge-Programing-Addon repository on GitHub; these links point at the commit this page was built from.
2022-SuperCon-Badge-Programing-Addon: common questions
How big is the 2022-SuperCon-Badge-Programing-Addon PCB?
The 2022-SuperCon-Badge-Programing-Addon measures 37.5 × 48.3 mm, has 6 copper layers and is 1.5584 mm thick.
How many components are on the 2022-SuperCon-Badge-Programing-Addon?
25 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 2022-SuperCon-Badge-Programing-Addon design files?
From the brokebit/2022-SuperCon-Badge-Programing-Addon repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 2022-SuperCon-Badge-Programing-Addon design in my own project?
The repository has no license, so all rights stay with brokebit. Use it as a reference, and ask the author before reusing the design.
Similar boards
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
Open smartwatch light
Open-Smartwatch
36.1 × 36.1 mm51 parts4LGPL-3.0246
OpenESC-20x20
OpenDrone-hw
31.2 × 33 mm180 parts6LCERN-OHL-S-2.0243
Open smartwatch gps
45 × 41 mm67 parts4LGPL-3.0241
HCPP NFC Hardware Badge
monero-project
80 × 71 mm5 parts2LCERN-OHL-1.2115
AStable Timer LED Badge
100 × 95 mm78 parts2LCERN-OHL-1.2115