48 open source boards using the CP2102N-Axx-xQFN20

Real designs built with the CP2102N-Axx-xQFN20, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

48 boardsClear filters|Most starred

How designs wire the CP2102N-Axx-xQFN20

Read from the KiCad layouts of 47 open source designs, one per repository: what each pin of the CP2102N-Axx-xQFN20 connects to, and the resistors, capacitors and other passives placed on it.

  • The RST pin has a pull-up to 3.3V on 41 of 47 designs, most often 1 kΩ (then 10 kΩ).
  • The SUSPEND pins is left unconnected on 99% of them.
  • The WAKEUP pin is left unconnected on 46 of 47 designs.
  • The RS485/GPIO.1 pin is left unconnected on 45 of 47 designs (a signal on 2).
RS485/GPIO.1pin 1Connected to: Not connected 96%
CLK/GPIO.0pin 2Connected to: Not connected 96%
GNDpin 3, 12, 21Connected to: GND 96%
VDDpin 6Connected to: 3.3V 85%
  • Decoupling capacitor on 79% · 100 nF (29), 4.7 µF (19), 1 µF (2)
VREGINpin 7Connected to: 3.3V 94%
  • Decoupling capacitor on 79% · 100 nF (29), 4.7 µF (24), 10 µF (2)
VBUSpin 8Connected to: Signal 79% · VBUS_DIV 21%
  • Resistor to GND on 74% · 47.5 kΩ (27), 47 kΩ (6), 22.1 kΩ (1)
  • Pull-up to VBUS on 72% · 22.1 kΩ (27), 22 kΩ (5), 47.5 kΩ (2)
  • Capacitor to GND on 57% · 1 µF (22), 100 nF (3), 4.7 µF (2)
RSTpin 9Connected to: Signal 98%
  • Pull-up to 3.3V on 87% · 1 kΩ (34), 10 kΩ (4), 4.4 kΩ (1)
NCpin 10Connected to: Not connected 100%
SUSPENDpin 11, 14Connected to: Not connected 99%
WAKEUPpin 13Connected to: Not connected 98%
CTSpin 15Connected to: Signal 60% · not connected 40%
  • Series resistor on 49% · 10 kΩ (22), 100 kΩ (1)
RTSpin 16Connected to: Signal 62% · not connected 38%
  • Series resistor on 51% · 10 kΩ (23), 100 kΩ (1)
RXT/GPIO.3pin 19Connected to: Signal 68% · not connected 32%
  • Series resistor on 55% · 470 Ω (21), 1 kΩ (5)
TXT/GPIO.2pin 20Connected to: Signal 68% · not connected 32%
  • Series resistor on 55% · 470 Ω (21), 1 kΩ (5)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Elixir hw by golioth, IEC-62056-21-Optical-Probe by twam, 154-watch by martinberlin and Parthiv pcb v2 by dddrrreee.

The CP2102N-Axx-xQFN20 in open source designs

The gallery holds 48 open source boards using the CP2102N-Axx-xQFN20 from 47 GitHub repositories; a typical one measures about 79.3 × 54.7 mm and carries around 80 components.

79% use four copper layers or more, and 33% carry an open source license.

The most starred is Elixir hw by golioth.

Microcontrollers on boards using the CP2102N-Axx-xQFN20

CP2102N-Axx-xQFN20: common questions

Where can I find a CP2102N-Axx-xQFN20 reference design?

Each of the 48 boards on this page is a real design using the CP2102N-Axx-xQFN20. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the CP2102N-Axx-xQFN20 RST pin?

The RST pin has a pull-up to 3.3V on 41 of 47 designs, most often 1 kΩ (then 10 kΩ). Counted from the KiCad layouts of 47 open source designs using the CP2102N-Axx-xQFN20.

How is the CP2102N-Axx-xQFN20 SUSPEND pin connected?

The SUSPEND pins is left unconnected on 99% of them. Counted from the KiCad layouts of 47 open source designs using the CP2102N-Axx-xQFN20.

How is the CP2102N-Axx-xQFN20 WAKEUP pin connected?

The WAKEUP pin is left unconnected on 46 of 47 designs. Counted from the KiCad layouts of 47 open source designs using the CP2102N-Axx-xQFN20.

What parts are used alongside the CP2102N-Axx-xQFN20?

The USBLC6-2SC6, BME280, ESP32-C3-WROOM-02-H4, MAX4466EXK and W25Q32JVSSIQ appear in the most repositories here.

Which microcontrollers do boards using the CP2102N-Axx-xQFN20 use?

Most are built on ESP32 (31), Raspberry Pi (4), STM32 (4) and AVR/Arduino (1).

How big is a typical board using the CP2102N-Axx-xQFN20?

The median is 79.3 × 54.7 mm, and 21% are two-layer designs.

What is the most popular open source board using the CP2102N-Axx-xQFN20?

By GitHub stars, Elixir hw by golioth, with 36 stars.

Can I simulate one of these boards using the CP2102N-Axx-xQFN20 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part