HardLabs

Peripherals

bullestock·chairbot·pcb/peripherals/peripherals.kicad_pcb

Peripherals PCB layout, top view — open source AVR/Arduino board by bullestock

About the Peripherals PCB

Peripherals is an open source AVR/Arduino PCB design by bullestock, published on GitHub. It is a 2-layer board measuring 76.5 × 61.8 mm, with 38 components from 12 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 10 connectors, 8 transistors, 8 resistors, 7 capacitors, 4 diodes and 1 IC.

Main components on the Peripherals

Arduino_Nano_v3.x

Peripherals bill of materials (BOM)

38 components, 12 distinct parts.

QtyPartRefs
1
Arduino_Nano_v3.x
U1
4
MMBT3904
Q1, Q3, Q5, Q7
4
IRFR5505TRPBF
Q2, Q4, Q6, Q8
2
JST XH
J1, J2
5
JST XH
J3, J5, J6, J7, J8
2
Conn_01x08
J4, J9
1
Conn_01x04
J10
4
SS34
D1, D2, D3, D4
2
100u
C1, C2
5
1u
C3, C4, C5, C6, C9
4
1k
R1, R3, R5, R7
4
10K
R2, R4, R6, R8

Peripherals design files

The KiCad project lives in the bullestock/chairbot repository on GitHub; these links point at the commit this page was built from.

Peripherals: common questions

What microcontroller does the Peripherals use?

The Peripherals is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Peripherals PCB?

The Peripherals measures 76.5 × 61.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Peripherals?

38 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Peripherals design files?

From the bullestock/chairbot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Peripherals design in my own project?

The repository has no license, so all rights stay with bullestock. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Peripherals without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in chairbot

Similar boards